Manualshelf

User's Manual

ManualsBrandsHandlink Technologies ManualsComputers & AccessoriesAP-100 Smart Wi-Fi Access Point
11121314151617181920
Handlink AP-100
Commercially Confidential
14
Memory Usage：AP-100 memory Usage (Byte).
Thin AP
Show the status of thin AP function (On/Off).
Network (Switch/Gateway)
It shows the status and information of network. It is switch mode as default.
IPv4 DHCP Client：Enable/disable IPv4 DHCP Client.
IPv4 Address：AP-100 current IPv4 address
IPv4 Subnet Mask：AP-100 IPv4 subnet mask
IPv4 Default Gateway Address：AP-100 IPv4 gateway address
Interfaces (2)
Ethernet
It shows the status and information of Ethernet including Mac address, Traffic (Tx/Rx), Speed,
Throughput (Tx/Rx), Duplex and Auto-negotiation. If click the “More>>”, more detail information
will be shown.
Radio (2.4G)
It shows AP-100 Radio0 interface information including Mac address, Traffic (Tx/Rx), Wireless
Mode, Throughput (Tx/Rx), Channel, Transmit Power and Noise Level. If click the “More>>”,
more detail information will be shown. As default, the 2.4G radio is on.
5.1. Interface
You can select Status -> Interface to check interface information which includes radio0 (2.4GHz)
and Ethernet information.