User's Manual

Handlink AP-100

Commercially Confidential

1. Open an IE session and type the IP address of the AP-100 AP/CPE. Example:

http://10.59.100.1 or https://10.59.100.1, where 10.59.100.1 is the AP-100’s IP address.

The default IP Address is 10.59.100.1.

2. A window will pop up, as shown in figure 4-5. Enter the user name and password in

the corresponding fields, which are the same as for the CLI. The default User Name

and Password are shown in Table 3. They are case sensitive.

Firmware version Default User Name Default Password

1.2.4.701

admin admin

Table 3 AP-100 default User Name and Password

Figure 4-5 Enter User Name and Password

3. A login page in IE appears, as shown in figure 4-6. A Menu Bar is located on the

top of the IE window. Different functions can be accessed through the menu bar.