User manual

Ver 1.0

3. USING THE RUGGED HANDHELD DEVICE

3.1 Using the Barcode Scanner

Barcode scanner is an optional feature on the Nautiz X9. This section will walk you through the basic

operations. To get the information on supported barcode formats, see 3.1.2 Supported Barcode Formats for

details.

To use the barcode scanner, simply press the scan keys on either side of the Nautiz X9 to scan the barcode.

3.1.1 Using the BarcodeScanWizard (Optional)

Generally a third-party barcode application will be used to process the data read by the scanner. An optional

BarcodeScanWizard is installed on the Nautiz X9. The App provides on-screen buttons to activate the

barcode scanner so that you don' need to press the triggers on either side of the Nautiz X9.

To use the App:

1. Launch the BarcodeScanWizard App.

2. Swipe down the Notification Area and make sure to turn on the Scan button.

3. A green button shall appear on the screen. Press the button to scan. The button turns green when the

scanner is activated.

4. Press the red button to stop.