Instruction Manual

69
NAUTIZ X7 Manual - Chapter 7
Setting up a Dial-up Connection
Using Wireless Network
Switching On or Off the Wi-Fi Radio
1. Tap  Settings  Connections  Connections.
2. In either group, tap Add a new modem connection.
3. In the Enter a name for the connection fi eld, enter a name for the connection.
4. In the Select a modem fi eld, select Cellular Line, and then tap Next.
5. Enter the phone number provided by your service provider, and then tap Next.
6. Enter your user name and password, and then tap Finish.
Your device has a built-in wireless network module. As long as you are in a wireless LAN (WLAN) environment, you can
connect to the network without physical cables.
By default, the Wi-Fi radio is switched off. To switch on or off the Wi-Fi radio:
1. Tap the Wireless Manager section on the Today screen.
- or -
Tap the connectivity indicator on the navigation bar and tap Wireless Manager.
2. In the Wireless Manager screen, tap Wi-Fi to change the Wi-Fi radio status.
When switched on, your device will display the word Available if wireless
networks are detected.
If you have previously connected to a wireless network, your device will try
to connect to the same network and display the name of the network after the
connection.
NOTE: Depending on your wireless service provider, dial-up connections may not be supported on
your device.