Instruction Manual

NAUTIZ X7 Manual - Chapter 6

Recording Video Clips

1. To start the program, press the key on your device or tap  Programs  Pictures & Videos  Camera.

2. Tap Menu

 Video to switch to the video mode. Below the display area are indicators of the current status.

3. For recording controls such as brightness and white balancing, tap Menu.

4. Press the key to start recording.

If needed, you can tap Pause to temporarily pause the recording and then tap Resume to continue.

5. To stop, press the key or tap Stop.

Or, the recording will automatically stop when the length reaches the pre-deﬁ ned

maximum value (30 seconds by default).

6. The video clip is saved to the predeﬁ ned storage location. To view the video clip, tap

Thumbnails.

Menu Items Description

Brightness

Seven brightness levels

Quality

352 x 288

White Balance

Five choices from which you can select one that matches the current light source.

Full Screen

Full screen on and off.

Options

Overall settings to the Camera program.

NOTE: By default, the display area blanks out and shows the word “Standby” when the camera

has been idle for one minute. To resume, tap the screen.