Instruction Manual

You can set up a communication environment with a PC.

Start

> Settings > Connections Tab > USB to PC

Computers adopting the tunneling VPN can make a connection with the

terminal through RNDIS. In this case, uncheck [Enable advanced network

functionality] before attempting to connect.

If [ActiveSync] is not started when the terminal is connected to the PC,

you should select [Enable advanced network functionality].

USB to PC

You can set the Wi-Fi wireless Internet.

Start

> Settings > Connections Tab > Wi-Fi

You can set the Wi-Fi environment for access with AP (Access Points) through

wireless Internet.

Wi-Fi

Setting wireless Internet

1 Select Wi-Fi in the Wireless Manager window. Then the list of nearby APs is displayed.

2 Select an AP on the wireless networks list, and select the [Connect] button.

If an AP list is not displayed, set the connection manually.

1 In the Wireless Network Conﬁ guration window, select [Add].

2 Enter the AP name in the [Network Name] ﬁ eld, and select [Next].

3 After selecting [Next], check [Provide key automatically], and select [Next].

4 Select [Finish], and the selected AP is displayed on the wireless networks list.

5 Select the [Connect] button to connect to the wireless LAN.

Settings

Setting Connection Environment

NAUTIZ X5 Manual