Instruction Manual

Using a USB Cable

Connecting ActiveSync

NAUTIZ X5 Manual

Start > Settings > Connections Tab > USB to PC

You can use various USB peripherals connected to

the terminal by selecting [Use advanced network

function].

This menu is activated as the peripherals are

connected to the terminal through a USB cable.

[USB to PC] increases the battery consumption. You can save battery by

deselecting this function when you are not using peripherals.

1 Download [Microsoft ActiveSync] from the Microsoft website, and install the

program on the PC.

To connect the terminal to a PC, you need to install the [Microsoft ActiveSync]

program on your PC.

If the [MicroSoft ActiveSync] program is already installed on your PC, you do not

need to install the program again.

The screenshots are for the Korean version of [Microsoft ActiveSync 4.5].

The images may vary depending on the version of [Microsoft ActiveSync], but the

functions are the same.

Installing ActiveSync