NAUTIZ X5 Manual
NAUTIZ X5 Manual - Content Content SAFETY INSTRUCTIONS I........................................................................................... ................ 4 SAFETY INSTRUCTIONS II............................................................................... ........................... 5 ABOUT THE PRODUCT............................................................. ............................................. 6-10 1. Checking Components............................................................
NAUTIZ X5 Manual Content TEXT MESSAGE.................................................................................................................. 35-37 1. Create a Text Message......................................... ....................................... .................... 35 2. Send a Text Message..................................................................................... .................. 35 3. View Text Messages.................................................................... ...
NAUTIZ X5 Manual Safety Instructions I Read these instructions and warnings to use the Product in a safe manner and to prevent accidents. Caution in relation to batteries • Batteries may explode when damaged, dropped, heated, immersed in water or taken apart with a tool. Make sure to keep the batteries out of reach of children or pets. • Do not use the Product in an area where there is a risk of explosion. • If the Product is wet, do not put it into a device that heats it (heater, microwave oven, etc.).
NAUTIZ X5 Manual Safety Instructions II Read these instructions carefully to keep yourself safe and avoid loss of property. 1. This Product is EMC-compliant. For safety and health reasons, use the genuine parts supplied by the manufacturer. Using unauthorized parts may affect your safety. 2. Do not press the power button when the Product is wet. Touching the adapter or power cord with wet hands may cause an electric shock. 3. Do not modify, disassemble or repair the Product yourself.
NAUTIZ X5 Manual About the Product 1 Checking Components The images in this user manual may not reflect the color and shape of the actual product. Please contact our Customer Care Center if you wish to purchase any additional or optional products.
NAUTIZ X5 Manual About the Product 3 Buttons Button Description Power button Used to switch On/Off the terminal. Barcode buttons (Right/Left) Used to operate the barcode functions. During a call Used to adjust call volume during a call. (Right : Volume up / Left : Volume down) Barcode button Used to operate the barcode functions. Camera button Press this button during a camera function to take a photo or video. Arrow buttons Used to move left/right/up/down. Call button Used to start the phone program.
NAUTIZ X5 Manual About the Product 3 Buttons 2 Button Description BKSP button The cursor moves backward, erasing the letters. It works like the Back Space key in computer. If you press and hold (at least 3 sec) this button, the letters are deleted one by one promptly and continuously. Enter button Changes lines in the text input mode. This button works like the Enter key in computer.
NAUTIZ X5 Manual About the Product 3 Buttons 2 - QWERTY Button Description Alphabet button Using to enter alphabets or symbols. Numeric button Alphabet button is default. Using to enter numbers or alphabets or symbol. Window button Press and hold this button for over 2 seconds, and the start menu from any application without tapping the screen. TAB button The Tab key helps to move the cursor to the next tab stop or the next field (on a form).
NAUTIZ X5 Manual About the Product 4 Features Item Description CPU PXA 320, 806MHZ OS Windows Mobile 6.1 RAM 256MB ROM 512MB DISPLAY 3.5” QVGA TFT-LCD/3.5” VGA TFT-LCD INTERFACE RS-232, USB 1.1 Host & Client, IRDA BATTERY Rechargeable, 3.7V 4400mAh, Li-ion SIZE 80(W) x 160(H) x 35.5(D)mm WEIGHT 425g (incl. a hand strap) ADAPTER 5V 3A 5 Communication Spec. Item Description Frequency : TX (1922.4MHz~1977.6MHz) RX (2112.4MHz~2167.
NAUTIZ X5 Manual Learning the Basics 1 Inserting/Removing Battery Inserting a Battery Removing a Battery 1 Place the battery and push in to the arrow direction. 1 Switch off PDA. 2 Turn the battery pins inside to fix the battery. 2 Turn the battery pins outside to remove the battery. 3 Lift off the battery to the arrow direction. Before removing a battery, make sure to switch off the terminal. An abrupt power shutoff may result in a trouble.
NAUTIZ X5 Manual Learning the basics 2 Inserting/Removing USIM/USAM Card About USIM Card? This USIM (Universal Subscriber Identity Module) is a user identification card which is inserted into a W-CDMA phone. This card integrates the SIM card containing subscriber information and the Universal IC Card (UICC) containing communication and banking function. It provides various functions including user authentication, global roaming, and e-transaction.
NAUTIZ X5 Manual Learning the Basics 3 Setting Password In order to prevent your USIM card from being used by another person, you need to lock it. Setting a PIN code Start > Phone > Menu Tab > Options... > Security Tab Enter [PIN required for telephone use], enter a 4~8 digit password, and click on [ok]. Cautions • The PIN code is a password used to protect the data on a USIM card. The default PIN code is <0000>, and you can change it as you like.
NAUTIZ X5 Manual Learning the Basics 4 Inserting/Removing MicroSD Card A MicroSD card is a micro flash memory media which is used for storing and transferring data. Inserting a MicroSD Card Push a memory card in the direction of the arrow on the SD card slot until it is completely inserted. Removing a MicroSD Card If you push the memory card in, it will spring out. Then, pull out the card. Precautions • Make sure to push in the memory card completely.
NAUTIZ X5 Manual Learning the Basics 5 Charging a terminal with a desktop charger Place the terminal on the desktop charger, and connect the adapter to the adapter jack on the rear of the desktop charger. < Rear side of desktop charger > Adapter jack Use the enclosed adapter for maximum safety and effectiveness. Power cables are sold separately. Please contact our Customer Care Center if you wish to purchase one.
NAUTIZ X5 Manual Learning the Basics 6 About the Battery • Standby time (extended battery) : at least 168 hours • Talk time (extended battery) : at least 8 hours • Capacity (extended battery) : 4400mA Charging indication lamp Battery Operating Time Operating Time Continuous talk time Continuous standby time Extended Battery At least 8 hours • In order to prevent damage to the battery, the modem is switched off automatically. Please charge the battery.
NAUTIZ X5 Manual Learning the Basics 8 Communication Status Indication For the terminals which support WCDMA communication, you can view the GSM or WCDMA 1xEVDO communication status with the [Communication status indication lamp] up to the right side of the terminal. Communication status indication lamp For terminals which support GSM communication, the lamp indicates the GSM communication status. For terminals which support WCDMA 1xEVDO, the lamp indicates the WCDMA 1xEVDO communication status.
NAUTIZ X5 Manual Learning the Basics 10 Using the Stylus Pen Use a stylus pen to select/execute/move a target on the screen. The stylus pen is attached in the top right corner of the terminal. Tap You can touch icons on the screen with the stylus pen to select or execute the icon the way you would click on the left mouse button when working on a computer. Drag Use this function to select multiple items. You can select characters or images the way you would drag the mouse pointer.
NAUTIZ X5 Manual Learning the Basics 12 Resetting the Terminal Press the [Reset] button on the back of the terminal slightly with the stylus pen. Reset button If there is a collision between programs or a program is stopped due to an unexpected situation, you may use the soft reset function. This is like rebooting a computer. Any information that is not saved is lost. 13 Hard Reset Numeric To make a hard reset of the terminal, press both the same time.
NAUTIZ X5 Manual Learning the Basics 14 Using IrDA Procedures for Using IrDA Port Place the terminals, with the IrDA ports facing each other. (The closer the ports are, the higher communication rates.) 1 Select Start > Settings > Connections Tab > Wireless Communication. 2 Select , and click on [ok]. 3 Check the data to be sent, and select Menu > Wireless Communication. 4 Check the corresponding IrDA port and touch the LCD.
NAUTIZ X5 Manual Using a USB Cable Start > Settings > Connections Tab > USB to PC You can use various USB peripherals connected to the terminal by selecting [Use advanced network function]. This menu is activated as the peripherals are connected to the terminal through a USB cable. [USB to PC] increases the battery consumption. You can save battery by deselecting this function when you are not using peripherals.
NAUTIZ X5 Manual Connecting ActiveSync 1 Installing ActiveSync -2 2 In the [License Agreement] window, select > In the [Customer Information] window, fill in the and field > On the [Target Folder] window, select the . 2 Using ActiveSync The screenshots are for the [Windows Mobile] version. The images may vary depending on the software version.
NAUTIZ X5 Manual 2 Using ActiveSync - 2 2 When the terminal is successfully connected to the computer, the [Microsoft ActiveSync] program will start automatically. Click on the [Search] button. 3 The folder shows the image, music or document folders on the terminal. You can save the files on the computer.
NAUTIZ X5 Manual Using the Barcode Reader 1 Using Barcodes You can scan barcodes by pressing the [Barcode] button on the side or front of the terminal. Barcode button 2 Scanning a Bar Code When you scan barcodes, maintain the correct distance (10cm) and angle between a barcode and the barcode scanner window. Correct scanning angle Incorrect scanning angle When you use barcodes in a specific program, contact the developer of the program for details.
NAUTIZ X5 Manual Using the Barcode Reader 3 Reading a Bar Code Start > Programs > Notes On , select the [New] button and read a barcode. Then, the barcode data are displayed. If you are reading a bar code while is open, the barcode is saved automatically in [Notes]. If you are reading a bar code while is closed, the data will not be saved, so you should select [New] and [Menu], and then, [Paste].
NAUTIZ X5 Manual Today Screen 2 Setting a Photo as the Background Image You can set a photo taken by yourself as the background image. 1 Select Start > Programs > Pictures and Videos > Show > My Documents > My Pictures. 2 Select the [Menu] button at bottom right part of the screen. 3 Select [Set as Today Background...]. 4 Select the transparency level of the background image, and select [ok]. 3 Adjusting the Volume You can adjust the volume of the folder/menu by selecting tone or ringer.
NAUTIZ X5 Manual Today Screen 4 Checking the Battery Select at the top right part of the screen, and check the battery status.
NAUTIZ X5 Manual Inputting Text Selecting Text Input Mode There are five different character input methods. 1 Block Recognizer This input method uses the traditional writing area box split in the middle. The left side is used for writing letters, and the right side is for number entry. Symbols and common functions are located to other smaller located in the right-hand part of the writing box area.
NAUTIZ X5 Manual Inputting Text 2 Key Pad Input letter or number using the terminal keyboard by choosing the Key Pad on the terminal screen as shown in the image below. See Buttons on pages 7~8. 3 Keyboard This input method displays an on-screen keyboard that can be used for inputting characters by tapping the screen with the stylus pen.
NAUTIZ X5 Manual Inputting Text 5 Letter Recognizer This option allows you to enter text using your own handwriting. The screen is divided into three different areas, a capital letter area, small letter area, and a number area. Characters are entered by printing letters into each area. The character is then analyzed and typed on the screen automatically.
NAUTIZ X5 Manual Phone Program 1 Making a Call Execute the phone program by selecting the [Phone] button, enter a telephone number, and press the [Call] button to make a call. Redialing If you press the [Call] button without entering a phone number, the terminal automatically makes a call to the last called party. Cancel numbers one by one. You can make a call using a speed dial number. If you select Menu at the bottom right on the speed dial screen, you can add/edit/delete speed dial numbers.
NAUTIZ X5 Manual Phone Program 3 Rejecting Calls Select the [Ignore] button at the bottom of the screen or press the [End] button on the keypad to cut off an incoming call. 4 Ending Calls Select the [End] button at the bottom of the screen or press the [End] button on the keypad to end a call.
NAUTIZ X5 Manual Phone Book 1 Searching in the Phone Book 1 Select the [Phonebook] button at the bottom right of the Today Screen, or select Start > Contacts. 2 Enter a name in the [Enter a Name...] field to search for the phone number. 2 Registering an Entry 1 Select the [New] button at the bottom left of the Phonebook screen. 2 Select the type of phone number.
NAUTIZ X5 Manual Phone Book 2 Registering an Entry - 2 3 Enter all the fields, and select [ok] at the top right of the screen to register the entry in the phonebook. 3 Viewing Menu Select the [Menu] button at the bottom right of the phone book window. Edit : You can edit the existing phone number. Send Contact : You can send a phone number through wireless communication. Copy/Delete Contact : You can copy/delete the selected phone number. Options...
NAUTIZ X5 Manual Text Message 1 Creating a Text Message Start > Messaging > Text Messages or on the Today screen, tap Messages. Go to Text Message screen, tap [Menu] and select [New] or Go to the Phone screen, and select a contact name from the Call History. Tap Menu and select tap Contacts and select [Send Text Message] Tap Inbox on the Text Message screen.
NAUTIZ X5 Manual Text Message 3 Viewing Text Messages Checking a text message from the ‘Inbox’ folder. Start > Messaging > Text Messages > Inbox Choose a received message from the Inbox to view the text message. Tap Received the text message at least 2 seconds to Reply/Delete/ Forward. 4 Managing Draft Messages A created message will be stored automatically in the Drafts folder if an error occured when sending a message.
NAUTIZ X5 Manual Text Message 5 Managing Deleted Items A deleted message will be automatically stored in the Deleted Items folder. Find the deleted message from Start > Messaging > Text Messages > Deleted Items 6 Managing Sent Messages A sent message will be automatically stored in the Sent Items folder. Find the deleted message from Start > Messaging > Text Messages > Sent Items Tap the sent message at least 2 seconds to Reply/Delete/Forward.
NAUTIZ X5 Manual Camera 1 Taking Photos Start > Programs > Camera If you press the [Barcode] button in the center of the terminal when the Camera is enabled, the terminal takes Still/Video footage. Barcode button If you press the [Barcode] button, the terminal takes the Still/ Video footage and automatically saves it in the album. Menu Video : Switches to video recording. Mode : You can select Normal/Burst/Timer. Resolution : 480×640/600×800/768×1024/1536×2048.
NAUTIZ X5 Manual Camera 1 Taking Photos - 2 By selecting the [Menu] button, you can select Delete, Send, Beam, Set as Today Background, Zoom, Edit, Properties, Options, Send to your space for the Still/Video. The terminal may be turned off or switch to standby mode in case the battery is low. If the camera is not used for 1 min, the terminal switches to standby mode. The video function may be different from this user’s manual depending on the camera program.
NAUTIZ X5 Manual Settings 1 Setting Personal Environment Buttons You can set the short-cut key functions for the buttons on the terminal. Start > Settings > Personal Tab > Buttons Setting short-cut key allocation program Select a button, and select the program you wish to allocate to the selected button. Available programs In addition to basic programs, you can allocate all programs installed by yourself. Menus You can register the frequently used programs in the [Start] menu.
NAUTIZ X5 Manual Settings 1 Setting Personal Environment -2 Notifications Tab You can select the sound method and notification tone for status or event. Start > Settings > Personal Tab > Sounds & Notifications > Notifications Tab You can select Ring type and Ring tone for status or event, including phone, wireless network, alert and ActiveSync. Owner Information You can set owner information or memo.
NAUTIZ X5 Manual Settings 1 Setting Personal Environment -3 Items Tab You can select items to be displayed on the Today screen. Start > Settings >Personal Tab > Today > Items Tab The selected items on the list are displayed on the Today screen. You can change the order in which the items are displayed with the [Move Up]/[Move Down] buttons. Input You can select the text input method or the voice recording format.
NAUTIZ X5 Manual Settings 1 Setting Personal Environment -4 Hint Tab Enter the words which will help you remember your password. A [Hint] window pops up if you fail to enter the correct password 4 times in succession. Phone Phone Tab You can select/deselect sound of the terminal. Start > Settings > Personal Tab > Phone > Phone Tab Ring type : You can select Ring / Increasing ring / Ring once / Vibrate / Vibrate and ring / Vibrate then ring / None. Ring tone : You can select a bell.
NAUTIZ X5 Manual Settings 2 Setting System Environment Memory Current status of memory (In use, Free) is displayed. Start > Settings > System Tab > Memory Main Tab You can find Total / In use / Free for memory storage and program. Storage Card Tab You can find the status (In use / Free) of the MicroSD memory and ProgramStore. External GPS Program Tab Select the port to be used by the program to import the GPS data.
NAUTIZ X5 Manual Settings 2 Setting System Environment -2 Task Manager The list of the programs in use and memory status are displayed. Start > Settings > System Tab > Task Manager With the menu, you can exit all or specific programs. Backlight Battery Power Tab / External Power Tab You can set the LED Off time after which the LED should be turned off automatically if no key action has been made.
NAUTIZ X5 Manual Settings 3 Setting Connection Environment USB to PC You can set up a communication environment with a PC. Start > Settings > Connections Tab > USB to PC Computers adopting the tunneling VPN can make a connection with the terminal through RNDIS. In this case, uncheck [Enable advanced network functionality] before attempting to connect. If [ActiveSync] is not started when the terminal is connected to the PC, you should select [Enable advanced network functionality].
NAUTIZ X5 Manual Settings 3 Setting Connection Environment - 2 Wireless Manager Start > Settings > Connections Tab > Wireless Manager You can select [All] to enable/disable three functions at the same time, or select [Wi-Fi] / [Bluetooth] / [Phone] for independent enabling/disabling. Wireless Manager - 2 When you enable this function, you can set the details of this function.
NAUTIZ X5 Manual Customer Service Before Requesting After-Sales Service Before asking for after-sales service, please back up the data from the terminal. We do not back up data from the products received in the Customer Care Center. Therefore, we assume no responsibility for loss/deletion of data. Bluebird Soft Customer Service FAX : +82-2-548-0870 E-Mail : gcs@bluebird.co.kr Address : Customers Service Center, 2nd floor, 558-8, Shinsa-dong, Gangnam-gu, Seoul, Korea Operating hours Mon.-Fri. : 9 A.M.
NAUTIZ X5 Manual Service Center Information Regulations on Free/Charging Repairs Type of Customer Damage When requesting important repairs within 10 days of purchase Requesting important repairs within 1 month since purchase date An important repair is needed after 1 month of exchange When it is impossible to exchange within 1 month The same problem occurs 3 times Possible The same problem occurs 4 times Repairs 5 problems in all different parts When the manufacturer has lost the product in which the cust
NAUTIZ X5 Manual Service Center Information Charged Service 1. If it is not a default, it will be charged when requesting for after-sales service. - Service request due to inappropriate use of the customer - Loss of a PIN number - Use of programs that might effect the program (over-clock, forceful changes in the input of the system, personal developments) 2.
NAUTIZ X5 Manual Warranty Certificate Thank you for purchasing a product from Bluebird Soft Inc. If a circumstance arises where you lose a receipt or the certificate of guarantee, then the term of guarantee will be calculated 3 months (certified by the number of the manufacture, a certificate of inspection) after the date of manufacture. In case of accessories (such as batteries), only those that match the sales list managed by the service center will be eligible for customer service.
