User's Manual

2. Press the power button to turn on your device. The backlight of the keypad will light
up and, after a few seconds, the setup screen appears.
3. Follow the on-screen instructions to complete the setup wizard.
4. For models with the phone function only: If a SIM card has been inserted and the
mobile phone network operator (or you) has set the PIN, you will be prompted to enter
the PIN. Enter the PIN and tap Enter.
If a SIM card has not been inserted yet, a message of an invalid or missing SIM card will
appear on the screen. You can tap Cancel to continue the startup procedure.
5.After the setup is completed, the Today Screen appears. You can now use your device.
ATTACHING HAND STRAP
Adjust the Hand Strap for convenient and comfortable use of the device
1. Connect the Hand Strap to the end of the device, underneath the battery cover.
2. Adjust the length of the Hand Strap by passing the Velcro through the hole.
3. Press both side of strap together to affix.
INSTALLING SCREEN PROTECTOR
Use of a screen protector is high encouraged. Screen damage caused by misuse of screen
protector may not be covered under warranty
The protective screen cover is installed at the factory to minimise damage that may
occur during shipment. Remove the protective screen cover before use. After removing
the screen cover, attach protective film to the screen.
USING SD SLOT
The MicroSD card slot is used for additional data storage and can be used to transfer
information. The slot is located underneath the battery.
It is recommended to follow the appropriate ESD preventative measures relating to
static electricity.
Take care when inserting and removing the MicroSD card as
damage from static electricity could occur.