NAUTIZ X3 Quick Start Guide
Getting Started Left Side, Front Side, Right Side 1 2 8 9 3 4 5 10 6 7 Ref 1 2 3 4 2 11 Component Receiver Indicate LED Scan Keys Power button 5 Windows Mobile Function Keys 6 Reset button Ref 7 8 9 10 11 Laser Scanner Component Microphone 20Pin Universal Connector Volume Keys Direction Key () Backspace, (1aA/FN)key (keypad function change) S(Send), E(End) Key, ( ) Enter key numeric Keys Imager Scanner
Getting Started Rear Side 12 Ref 13 12 Stylus pen and holder 14 13 Camera and Camera flash 15 Component a Micro SD card Slot 14 Hand strap holder 15 Battery latch b U-SIM Card Slot a b Unpacking the product Li-ion polymer battery Main unit of PDA Hand strap Travel Charger Data sync cable Stylus and its string 3
Installing the SIM card Please refer to the manual provided by your service provider for further information on SIM card. Installing a SIM card. Removing a SIM card.
Installing the main battery NOTE: One battery is included with the product. You can buy an extra battery separately. Inserting the battery. Removing the battery. Caution: Please charge the battery for 24 hours before the first use. Charging/battery level indicator LED Description Turned off Unable to charge PDA / The battery is not properly inserted into the cradle or the power is off/ The power of the charger or cradle is disconnected.
Select Wireless Manager Note: Wireless Connectivity option may differ depending on the configuration. Wireless Manager Window. MicroSD (Micro Secure Digital) card Installing MicroSD. Removing MicroSD is in the reverse order.
Adjusting the hand strap Adjust the hand strap for the convenient use of the device for a long period of time. 1. Connect the hand strap to the end of the device beneath the battery cover. 2. Adjust the length of the hand strap by passing the Velcro through the hole. 3. Press both sides of the strap together to get fixed. Removing the screen protection cover The screen protective cover is installed at factory before shipment in order to minimize scratching, which may occur during shipment.
Scanning barcodes 1. 2. Open the application Notes in the NAUTIZ X3. The laser beam comes out of the end of NAUTIZ X3, whilst the scan button is held. The red scan beam should cover the entire barcode. The laser beam indicates that scanning is in progress. If an alarm goes off and the laser is turned off, this will indicate that the barcode was successfully decoded. Correct Incorrect 3. Release the scan button. Image scanning 1. 2. Open the application Notes in the NAUTIZ X3.
Using the phone Overview With the NAUTIZ X3, a user can make a call, save contacts, manage phone call records, send text messages, save received messages, etc. Using the phone application Regardless of running programs, a user can use the phone application anytime he wants. In order to use the phone application, choose Start > Phone or just tap the green button on the keypad of the NAUTIZ X3. Using the Phone Making a phone call using the phone program 1.
Notification of new text message On the New Text Message screen, you can make a call ands ave, read or delete messages. If you are subscribed to the Caller’s Number Identification Service, you can identify the caller by comparing the number with the information saved on Contacts. Even if the phone is disabled, you can still read received text messages. 1. Tab Start > Text Message. 2. The Text Message window will appear. 3. Tap a text message in the message list.
Sending text messages 1. 2. 3. 4. 5. Tap Start > Text Message Tap Create New Text Message • You can check the size of the message you are writing via the character counter. • If you want to know whether the receiver has received your message, choose Message Transmission Check Request after tapping Menu > Message Option.
Video recording 1. 2. 3. Tap Start > Pictures and Videos icon Tap camera icon on the navigation bar Choose Menu > Videos to set the shooting mode to video. Available recording time will be displayed on the screen. Note: The default video recording time is limited to 30 seconds. 4. Start recording by tapping Enter key Stop recording by tapping Enter key again Setting the GPS on the NAUTIZ X3 Before use the GPS, please turn on the GPS function from Start > Settings > System > GPS Power.
