User's Manual

Algiz 10X Manual

36 handheld

Connectors

1. Remove the battery

2. Soak the end of a swab with isopropyl alcohol and rub across the connector pins.

3. Be careful not to leave any residue on the connectors.

4. This process should be repeated approximately three times.

Note: If isopropyl alcohol is not available, use computer cleaning detergent or a pencil eraser

(rubber), taking care not to leave any foreign bodies on the pins.

reproduced, copied, translated or transmitted in any form or by any means, electronic or mechanical,

for any purpose, without the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

Handheld Group AB reserves the right to make any product changes without notice, including to

circuits and/or software described or contained in this manual, in order to improve design and/or

performance. Handheld Group AB assumes no responsibility or liability for the use of the described

product(s), conveys no license or title under any patent, copyright, or mask works rights to these

products and makes no representations or warranties that these products are free from patent,

this manual are for illustration purposes only. Handheld Group AB makes no representation or

warranty that such applications will be suitable for the specified use without further testing or

modification.