ALGIZ 10X Manual
Algiz 10X Manual Safety Precautions Warning Always completely disconnect the power cord from the device before you uncover the device and work on the hardware. Do not connect the electronic device with a power socket while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open mechanical housing. Caution Always ground yourself to remove any static charge before touching the printed circuit board.
Algiz 10X Manual Index Part 1: ................................................................................................................................................ 5 Identifying Algiz 10X .......................................................................................................................... 5 Getting Started .................................................................................................................................. 5 What’s in the Box ....................
Algiz 10X Manual WLAN 24 Bluetooth ........................................................................................................................................ 24 WWAN (3G) - Optional ................................................................................................................... 25 GPS ….. ............................................................................................................................................ 26 Camera .....................................
Algiz 10X Manual Part 1: Identifying Algiz 10X Getting Started 5 handheld
Algiz 10X Manual What’s in the Box Item Description One 2 Cell Li-Ion Battery Pack 12V Adapter w/ standard power cord. Standard type, 1.
Algiz 10X Manual Specification ALGIZ 10X is a rugged Tablet tablet PC designed for use in various challenging environments, e.g. field work, outdoor activities and construction sites. With its rugged design, ALGIZ 10X is able to withstand shocks, vibrations, high humidity as well as high/ low temperatures.
Algiz 10X Manual COM Port Assignment COM1 RS232 COM2 B+ Power & UART Wafer COM3 GPS COM6 3G COM7 3G COM8 3G COM11 Docking Station COM12 Docking Station Boot Options F1 Initiate factory reset F2 Enter BIOS F3 - Factory Reset The Algiz 10X has a built-in recovery utility that can be used to reset your computer’s SSD disk to its factory state. Press F1 during booting when the Handheld logo screen appears. Follow the instructions on the screen to continue with the factory reset.
Algiz 10X Manual Front Side Ref. Item Description 1 Front Microphone Receives sound to make voice recordings. 2 Light Sensor Senses the ambient light for automatic adjustment of the display backlight. The features can be enabled through the OSD Control Keypad. 3 OSD Control Keypad The OSD Control Keypad provides hotkeys with all functions including Power On/Off, Menu, Up, Down, Left, Right, Enter and programmable hotkeys.
Algiz 10X Manual Left and Right Side Ref. Item Description 1 DC Power Jack DC plug for supplying power to the device 2 VGA For connection to external display devices such as monitors and projectors 3 USB 2.0 Port Can be connected to USB-interface peripherals 4 RS232 Accepts external connections using the interface of RS232 (D-sub 9 pins) 5 Ethernet(RJ45) Port For connection to an Ethernet 10/100/1000-based network 6 USB 2.
Algiz 10X Manual Rear Side Ref. Item 1 Stylus Pen 2 Service Window Description User-accessible compartment. Function Keys Components Power Button* Description Hold down for 4 seconds to turn the computer on. Menu Menu button to control: brightness, volume, battery, power to modules, and system information. Up/Down/Left/ Control of up, down, left, right and Right/OK Button Enter functions. F1 – F3 3 programmable buttons. Press F1 to configure.
Algiz 10X Manual LED Indicators LED Term Power mode Symbol Indicator Status Description Green: System is on No light: System is off or LED indicators are off in Hot-tab. Storage Status Flashing green light: SSD is reading/writing data Radio Status Green: Indicates that any transmitting radio is turned on. (WiFi, BT, WWAN) Battery Status Green: Full battery Red: Low battery Orange: Charging Flashing red: Running on Hot-swap battery GPS Status 12 handheld Green: GPS is on.
Algiz 10X Manual Part 2: Using Algiz 10X 13 handheld
Algiz 10X Manual Before turning the unit on, make sure that the tablet is either connected to AC power or the battery. AC Power The Algiz 10X power supply is comprised of two parts, the power adapter and the battery. The power adapter converts AC power from a wall outlet to the DC power required by the Algiz 10X. Your Algiz 10X comes with a universal AC-DC adapter. That means that you may connect the power cord to any 100V-120V as well as 220V-240V outlets without using power converters.
Algiz 10X Manual Removal of the Battery Pack Caution Please fully charge the battery in advance of operating ALGIZ 10X for the first time. New battery packs must be 100% charged before ALGIZ 10X is disconnected from the external power source. It takes a few hours to fully charge the battery when ALGIZ 10X is turned off.
Algiz 10X Manual Charging the Battery Before you use your Handheld tablet PC, you need to charge the battery. The battery begins to charge as soon as the Handheld tablet PC is connected to the external power source. Please fully charge the batteries before using them for the first time. The new battery should be fully charged before the tablet PC is disconnected from the external power source. The battery pack is fully charged when the battery LED indicator turns OFF.
Algiz 10X Manual Power Adapter Manufacturer: EDAC Power Electronics Co Ltd Model: EA11001C-120 Input Rated: 100-240Vac, 1.8A, 50-60Hz. Output Rated: DC 12V, 6.66A. Battery Pack Manufacturer: T-Gee Electronic Co., Ltd Model: ALG10X-08A Rated: 5300mAh DC 7.4V Caution! Do not attempt to fix or replace the battery, as this may cause an explosion! Only use the specified battery and follow the instructions in the manufacturer's user manual.
Algiz 10X Manual Starting Algiz 10X Note: you will be asked to enter the Microsoft Windows license number which can be found under the main battery. Press the power button for 4-6 seconds to power on the Algiz 10X. Follow the Microsoft Windows on-screen instructions to get started with Windows. The screen calibration may not be accurate the first time you start the computer.
Algiz 10X Manual Installing WWAN Module Please read the safety precautions on page 3 before installing a WWAN module. Insert the WWAN module into the top mini PCIe slot. Install the antennas. The Algiz 10X has two WWAN antennas connected to the Gobi 3000 card. Install the antennas according to the picture.
Algiz 10X Manual Installing SIM Card, SD Card Remove the SIM/SD card cover on the right side. This cover is secured with two screws. Insert the SIM card according to the picture.
Algiz 10X Manual Part 3: Software 21 handheld
Algiz 10X Manual Hot-Tab Algiz 10X has a pre-installed control application, Hot-Tab. The control application is used to monitor and control features such as brightness, volume, battery status, power to modules and system information. The control application is accessed by pressing menu on the Algiz 10X. Press menu multiple times to navigate through Hot-tab. You can use the arrows on the control panel to navigate within the OSD menu.
Algiz 10X Manual Adjusting the Speaker Volume The Speaker Control is accessed by pressing menu twice. Use the left and right arrow keys to adjust the volume. Battery Status The Battery status is accessed by pressing menu 3 times. Press the Menu button three times to view the battery status. The Algiz 10X has a replaceable Main battery as well as a second built-in hot-swap battery. The hot-swap battery will activate once the main battery is empty or unplugged.
Algiz 10X Manual WLAN Algiz 10X can connect to IEEE 802.11 b/g/n networks operating on 2.5GHz. The Function Control is accessed by pressing menu 4 times. Check Wi-Fi to turn the Wi-Fi radio on. Uncheck Wi-Fi to turn it off. Bluetooth Depending on your application, the Bluetooth module can give you capability for short-range wireless communication between devices without requiring a cable connection.
Algiz 10X Manual WWAN (3G) - Optional The ALGIZ 10X is prepared for WWAN (3G) connectivity. If you have a WWAN modem installed, navigate to the Wireless Control by pressing menu 4 times. Check 3G to switch WWAN radio on/off. Note: You must install a SIM card in order for the Algiz 10X to access a WWAN network. On the desktop, double-click the AirCard Watcher shortcut to install the program used to control WWAN operations. You can also access the installation file from the C:\Drivers\3G folder.
Algiz 10X Manual GPS Algiz 10X is equipped with a dedicated GPS receiver for optimum performance. The Function Control is accessed by pressing menu 4 times. Check GPS to turn the GPS receiver on. Uncheck GPS to turn it off. The GPS evaluation software, U-Center, is accessed by double-clicking the U-Center icon available on the desktop.
Algiz 10X Manual Set Baudrate to 9600 GPS will now start looking for satellites to calculate its position. This procedure may take from a few seconds to a few minutes depending on satellite positions, interference, environmental factors and radio noise. Tip: See the U-Center manual for more information about this GPS evaluation software.
Algiz 10X Manual Camera The ALGIZ 10X has a built-in 5-megapixel camera. The Function Control is accessed by pressing menu 4 times. Check Camera to turn the Camera on. Uncheck Camera to turn it off. Press F1 and click the Camera icon to start the Camera. In the settings you can control the destination folder for saved pictures or videos, previews, as well as image resolution. External GSM Antenna The Function Control is accessed by pressing menu 4 times.
Algiz 10X Manual External GPS Antenna The Function Control is accessed by pressing menu 4 times. Check GPS Antenna (auto) to activate an external antenna installed on the vehicle dock Alg10X-05A. When this item is checked, Alg10X will automatically switch to the external antenna when the unit is docked. Do not check this item unless you have an external antenna installed on your Alg10X-05A vehicle dock. Uncheck GPS Antenna (auto) to turn this feature off.
Algiz 10X Manual Part 4: Regulatory Information 30 handheld
Algiz 10X Manual FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device must not cause harmful interference, and 2. This device must be able to withstand any interference received, including interference that may cause undesired operation. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Algiz 10X Manual antenna used for this transmitter must be installed so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antennas or transmitters.
Algiz 10X Manual Part: 5 Algiz 10X Care 33 handheld
Algiz 10X Manual Battery Protection Tips The recommended temperature range for charging the battery pack is -5℃ ~ 35 ℃. To avoid damage to the battery, recharge the battery pack when it is nearly discharged. When recharging, the battery pack should be fully charged.
Algiz 10X Manual • If you suspect damage to the device or the battery, contact Handheld. Touch Screen Protection Tips Avoid applying excessive force to the display, use only your finger or the supplied touchscreen stylus pen on the display. The recommended force shall not exceed 200gf. Take care to protect the screen from scratches. Only use a plastic pen designed for touchscreens or the stylus provided. Never use pens, pencils or other sharp objects on the screen.
Algiz 10X Manual Connectors 1. Remove the battery 2. Soak the end of a swab with isopropyl alcohol and rub across the connector pins. 3. Be careful not to leave any residue on the connectors. 4. This process should be repeated approximately three times. Note: If isopropyl alcohol is not available, use computer cleaning detergent or a pencil eraser (rubber), taking care not to leave any foreign bodies on the pins. Copyright Notice Copyright © 2010 Handheld Group AB, ALL RIGHTS RESERVED.
Algiz 10X Manual Customer Service Support is provided by Handheld. Visit our website at www.handheldgroup.com to find updated information about the product. You can also contact your distributor, sales representative or our customer support center for further assistance. If you contact our customer support center please have the following information ready before you call: Product serial number Peripheral attachments Software (OS, version, application software, etc.
