Quick Start Guide
Starting ALGIZ 10X
Note: you will be asked to enter your Microsoft Windows license number that is located under the main battery.
Press and hold power button for 4 seconds to power on the unit. Follow the on-screen instructions to get started
with Windows. The screen calibration may not be accurate the rst time you start the computer. Follow the procedure
to calibrate the touchscreen.
Screen Calibration
1. Open Control Panel > Hardware and Sound > Tablet PC Settings
2. Click Calibrate and follow instructions
Repeat step 1 and 2 until you are satised with the calibration
What’s in the Box
Insert Battery Pack
Caution
Please fully charge the battery in advance of operating Algiz
10X for the first time. New battery packs should be fully
charged before Algiz 10X is disconnected from the external
power source. It takes approximately 3 hours to fully charge
the battery from empty.
Ref. Item Description
1 Battery Pack One 2 Cell Li-Ion Battery Pack
2 12V Adapter
12V Adapter w/ standard power cord. Standard type, 1.8M
3 Screen protector lm
4 Quick start guide Algiz 10X Quick start guide
ALGIZ 10X
Quick Start Guide
handheld
32
1
4