User Guide

• Press E to choose this option.
• Use G and H to adjust the 'hours'.
• Now use I and J keys to select 'minutes',
and use G and H to adjust.
• You can use the same method to adjust
'seconds' if you wish.
• Press E to update the MP2500 clock and
return to the Utility menu.
• Press J to select the Set Date option and
press E.
• Set the date by using I and J to select
each parameter, and G and H to adjust its
value, as you did for the time.
• Press E to update the MP2500 calendar
and return to the MP2500 Utility menu.
6. Set up the rechargeable battery type:
Note: If non-rechargeable alkaline batteries are
fitted, skip step 6 by pressing C to return to the
DOS prompt.
• Press J until Non-volatile
Configuration is selected. Press E.
• Press J until SPM Battery type is
selected. Press G or H to select either
Nicad or NiMH rechargeable battery type.
Press E, and press E again.
• The MP2500 will reset. Follow the instructions
in step 4 above, but then continue at step 7.
7. Set up the Battery Charging mode:
• Hold down the L (BACKLIGHT/PAW) key and
press
H
. This will display an information
screen which includes a menu of options.
• Use J to select Power, and press E.
• The function Battery Charging Support
will be displayed.
• Use H to select charging enabled or
disabled.
Note: If non-rechargeable alkaline batteries
are fitted, you must select disabled.
8. Accept the setting by pressing E.
Press C to return to the DOS prompt.
9. Charge the battery: press P to turn off the
MP2500 and leave it connected to the MP2500