User Guide

PROBLEMS

If you have problems with the FS/2, TELL YOUR

SYSTEM PROVIDER, but here are a few quick

checks:

● If the unit will not turn on, check the batteries’

orientation and try a fresh set of batteries.

● If you cannot read the display, try adjusting the

screen contrast: hold down either S (SHIFT) key

and press U or D.

● If you drop the unit and it stops working, try

turning off and on, and check the batteries.

● Your application may provide a RESET facility.

● If the unit is very dirty or wet, clean it as

described in CLEANING.

CAUTION: There are no user serviceable parts

inside the FS/2. Do not attempt to open.

Electromagnetic Compatibility

The FS/2 complies with EN55022 Class B.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

If the FS/2 does cause harmful interference, turn it off and consult

your dealer or technician for help.

The FS/2 must only be used with approved peripherals and

approved A.C. adaptors; shielded communications cables must be

employed.

Changes or modifications could void the user’s authority to operate

the equipment.

Printed in England P-2240-0010