User Guide

CONTROLS

Note: Your application’s user instructions may

supplement the following information.

Turning on and off

Press P to turn on, or off. To conserve power, the

FS/2 turns off automatically if you have not pressed

any keys for a short while.

Screen contrast

Adjust the screen contrast for optimum readability,

especially at temperature extremes. Hold down either

S (SHIFT) key and press U (UP ARROW) to

increase contrast or D (DOWN ARROW) to decrease

contrast.

Screen backlight

In low ambient light, press C to turn the backlight on.

To turn it off, press C again. You may need to press

at the same time (depending how your FS/2 is set

up). The backlight turns off automatically after a short

time, to conserve power.

Date entry

To type numbers or letters, press the appropriate

keys. To type a space, press the # (SPACE) key.

To delete characters you’ve just typed, press the B

(BACKSPACE) key.

To select the characters or functions shown above

the keys, hold down either S (SHIFT) key and then

press the appropriate key.

Moving the cursor

Software applications will normally allow you to move

the cursor a character or line at a time, using the

arrow keys: L, R, U and D. To move the cursor up

or down several lines, use U and D.