User's Manual

ALGIZ 10X User’s Manual
73
F. LAN Problem
Condition
Check Point
I cannot access the network.
 Make sure that the LAN cable is properly
connected to the RJ-45 connector and the
network hub.
 Make sure that the network configuration is
appropriate.
 Make sure that the user name or password is
correct.
G. Power Management Problems
Condition
Check Point
The Tablet PC does not enter
Standby or Hibernation mode
automatically.
 If you have a connection to another computer,
the Tablet PC does not enter Standby or
Hibernation mode if the connection is actively in
use.
 Make sure that the Standby or Hibernation
time-out is enabled.
The Tablet PC does not enter
Standby or Hibernation mode
immediately.
 If the Tablet PC is performing an operation, it
normally waits for the operation to finish.
The Tablet PC does not
resume from Standby or
Hibernation mode.
 The Tablet PC automatically enters Standby or
Hibernation mode when the battery pack is
empty.
 Do any one of the following:
- Connect the AC adapter to the Tablet PC.
- Replace the empty battery pack with a fully
charged one.
H. Startup Problems
Condition
Check Point
When you turn on the Tablet
PC, it does not respond and
the Power indicator does not
light green.
 If you are using an external AC power, make
sure that the AC adapter is correctly and
securely connected. If so, make sure that the
electrical outlet works properly.
 If you are using the battery power, make sure
that the battery is not discharged.
 Wait awhile.