User's Manual

NAUTIZ X8 MANUAL
38 handheld
Generally, software for Windows Embedded Handheld 6.5 Pro devices must be installed to the host workstation
first, then transferred to the Terminal.
1. Download the program to the workstation from either the Internet or the install CD. You may see a single
*.exe or setup.exe file, a *.cab file, or *.dll. (There may also be several versions of files for different
device types and processors.)
2. Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
3. Connect the terminal to the workstation.
If the File is an Installer
An installer program is one that installs to the workstation and the terminal simultaneously; one process installs to
both devices.
1. On the workstation, the *.exe or *.setup.exe file. The installation wizard begins.
2. Follow the directions on the workstation screen.
The installation process includes transferring the software to the terminal via Windows Mobile.
If the File is Not an Installer
Some programs cannot be installed on workstations because they are designed exclusively for Windows
Embedded Handheld 6.5 Pro devices. In these cases, the appropriate files must be stored on the host workstation
and transferred to the terminal via Windows Mobile.
NOTE: If an error message stating that the program is valid but designed for a different type of computer
appears when you try to install the program on the workstation, the program is not an installer.
1. If you cannot find any installation instructions for the program in the Read Me file or documentation, open
Windows Mobile Device Center on the workstation.
2. On the workstation, navigate to the workstation folder containing the program file(s) and copy them to the
Program Files folder on the terminal. If you want the program to persist through hard resets, save the
program to the Autoinstall \ Cabfile folder(\AutoInstall\Cabfile).
3. On the terminal Desktop, navigate to the folder where the program is located.
4. Tap on the program file to install it. If you copied the file to the Autoinstall\Cabfile folder, you can choose
to install the program by performing a hard reset. The program installs as part of initialization.
5. After installation is complete, access the program by tapping Start -> Programs, and the program appears on
the Programs screen. Tap the icon to open the program.
7.13. Wireless Radios
There are four radio options: 802.11b/g/n Bluetooth, Phone and GPS.
1. 802.11 b/g/n (WLAN configuration): Integrated Wi-Fi (802.11b/g/n Radio), up to 72.2Mbps