User's Manual

NAUTIZ X8 MANUAL
37 handheld
7.7. Software Requirements for Communication
To sync successfully, Windows Mobile Device Center must be configured for the same communication type on
both the host workstation and the Terminal. WMDC must be set up on your workstation before you initiate
synchronization from the terminal for the first time.
7.8. Setting Up the Host Workstation
Verify that Windows Mobile Device Center is configured to use the appropriate communication type by selecting
File -> Settings -> Connections -> USB to PC.
7.9. Communicating with the Terminal
After setting up both the workstation and the terminal, connection should be automatic.
1. Connect the Terminal to the workstation using a USB cable.
2. The Terminal automatically opens Windows Mobile Device Center to establish a connection.
7.10. Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal connects to host workstation with
WMDC installed.
7.11. Exploring the Terminal from the Workstation
When the terminal and desktop computer are connected, open the main Windows Mobile window (on the desktop),
and click File Management - browse the contents of your device.
The Terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping
or copying and pasting as you would for moving files between folders on your hard drive.
7.12. Adding Programs via Windows Mobile
WARNING: When selecting programs, verify that the program and version of the program are designed for the Windows
Embedded Handheld 6.5 Pro and the terminal’s processor. You can verify your processor by tapping Start -> Settings ->
System -> About -> Version tab. Make a note of the information in the Processor field.