User's Manual

NAUTIZ X8 MANUAL
18 handheld
Touch Screen Display
The display is a LCD (Liquid Crystal Display) with a capacitive multi-touch screen. The 4.7" FWVGA (Full
Wide Video Graphics Array) has Asahi Dragontrail chemical strengthened glass and the resolution is 854 x
480. See Display Backlight on paragraph 4.3.
Try to keep water off the display as the touch screen does not perform well with water on it.
Use the stylus provided with your Terminal as this touchscreen works best with this stylus. For touch screen
input, use the stylus included with the terminal or your finger. Generally you also achieve greater accuracy
with the stylus for buttons or icons that are close together.
WARNING: Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the
input panel and may cause damage not covered by the warranty.
4.3. Display Backlight
The intensity of the backlight of the touch screen display may be changed, and the backlight may be
programmed to turn off after the terminal has been idle for a specified period of time. To adjust the intensity
of the backlight while on battery power, tap Start -> Settings -> System -> Backlight.
Screen Backlight - Battery/External Power
Move the slider to adjust the screen backlight while on battery power.
You may turn the screen backlight off if the device is not used for a
designated period of time by checking the option and designating the
desired time period.
You may also turn on the screen backlight when a button is pressed or the
screen is tapped by selecting the appropriate checkbox.
You may make the same changes when on external power by tapping the
External tab.
NOTE: Using the backlight option while on battery power substantially
reduces battery life.
4.4. Keypad Backlight
To turn on the keypad backlight, check the checkbox.
The duration of the keypad backlight is the same as the settings on the display
backlight.
