User's Manual

NAUTIZ X4 Manual
61 handheld
Once asked if you need to authenticate the device,
3. Enter 4 random digits and tap the Next button.
4. Enter the same digits on the other device when prompted.
5. After pairing, tap on the selected device / profile and select Active.
12.4. Setting Up a Bluetooth Printer
1. Make sure that the Bluetooth printer is on and activated.
2. If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar).
3. Tap Scan Device, which runs a Bluetooth Inquiry, then SDP Query.
4. If you see your Bluetooth printer device displayed. You can press the Refresh button to search again.
13. Single Slot cradle/Single Ethernet cradle Device
☞NOTE: The cradle is option accessory and needed to purchase separately with incidental expenses in the aftermarket
13.1. Overview
☞NOTE: The information in this chapter applies to both the Single Slot cradle and Single Ethernet cradle devices unless otherwise indicated.
As the hub of your HANDY TERMINAL system, the Single Slot cradle charging and communication cradle supports full-
speed USB 2.0 with a workstation. The Single Ethernet cradle is identical to the Single Slot cradle except it supports
Ethernet communication as well as full-speed USB 2.0.
13.2. Battery Charging
The base completes a full charge of the battery pack in 5 hours for the standard capacity
4000mAh pack on the handy terminal. .
In addition to charging, the base powers the terminal’s intelligent battery charging system, which protects the battery from
being damaged by overcharging. The terminal senses when a battery pack is fully charged and automatically turns off the
charger. If the battery voltage drops below the charge threshold, the charger turns on again to maintain the battery at full
capacity. As a result, Handy Terminals may be stored in the base indefinitely without damage to the terminals, battery
packs, or peripherals. For prolonged storage, see Storage Guidelines on paragraph 4.20.
13.3. Power Supply
The power cable that ships with each terminal also powers the base.
WARNING: We recommend use of Handheld peripherals, power cables, and power adapters. Use of any non-Handheld peripherals,
cables, or power adapters may cause damage not covered by the warranty.
We recommend use of Handheld Li-Ion battery packs. Use of any non-Handheld battery may damage not covered by warranty.
WARNING: DO NOT attempt to charge damp/wet handy terminals or batteries. All components must be dry before connecting to an
external power source.