User's Manual

NAUTIZ X4 Manual
57 handheld
10.16. Adding Programs from the Internet
When you have established a network connection (whether via Wireless LAN, Bluetooth, or activeSync), you can access the
Internet and download additional software programs.
When selecting programs, verify that the program and version of the program are designed for Windows Embedded
Handheld 6.5 Pro and the terminal’s processor. You can verify your processor by tapping Start -> Settings -> Control Panel
-> System -> General tab. Make a note of the information in the Processor field.
1. Open Internet Explorer and navigate to the program’s location. You may see a single *.exe or setup.exe file, or several
versions of files for different device types and processors.
2. Select the program version that matches your Handy Terminal and processor.
3. Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
4. Download the program to the terminal directly from the Internet.
You would normally store the program in the Program Files folder unless another location is required by the program.
5. On the terminal, the installer file; e.g., the *.exe file.
6. The installation wizard for the program begins.
7. Follow the directions on the screen to complete installation.
11. WLAN Client
11.1. Enabling the WLAN Radio
The WLAN Driver must be enabled for the radio to transmit a signal.
You cannot connect to a network unless the radio is enabled.
There are two ways in order to enable WLAN Driver,
Wi-Fi Turn on/off from Wireless Manager and from PWC Control.
1. Start -> Setting -> Connections -> Wireless Manager -> Select Wi-Fi.
2. Start -> PWC -> Power On button tap in Status page.