User's Manual

NAUTIZ X4 Manual
54 handheld
10.7. Software Requirements for Communication
To sync successfully, ActiveSync must be configured for the same communication type on both the host workstation and
the Handy Terminal. ActiveSync must be setup on your workstation before you initiate synchronization from the terminal for
the first time.
10.8. Setting Up the Host Workstation
Verify that ActiveSync is configured to use the appropriate communication type by selecting
File -> Connection Settings.
For USB communication, check Allow USB connections.
10.9. Communicating with the Handy Terminal
After setting up both the workstation and the terminal, ActiveSync connection should be automatic.
1. Connect the Handy Terminal to a communication peripheral, such as the Handy Terminal Docking cradle.
2. The Handy Terminal automatically opens ActiveSync or Windows Mobile Device Center to establish a connection.
10.10. Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal’s mechanical connector connects to a Handy
Terminal peripheral that is connected to a host workstation with ActiveSync installed.
10.11. Exploring the Terminal from the Workstation
When the terminal and desktop computer are connected, open the main ActiveSync window (on the desktop), and click
Explore.
The Mobile Device folder opens in Windows Explorer.