User's Manual

NAUTIZ X4 Manual
39 handheld
6.7. Decoding
The Handy Terminal supports Full-area Imaging decode mode.
Full-area Imaging
With full-area imaging the Handy Terminal supports omni
obtained from many positions. For details, see Omni
6.8. To Decode a Bar Code
1. Tap Start -> Demos -> Scan Demo.
2. Position the Handy Terminal over one of the
A range of 4–10 inches (10–25 cm) from the bar code is recommended.
3. Project the aiming brackets by pressing and holding the
4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve
optimal decoding; Omni-Directional Scanning Positions
5. When the bar code is successfully decoded, the decode LED
6.9. Sample Bar Codes
You can use the following bar codes to verify decoding:
Code 39
6.10. Omni-Directional Scanning Positions
The high-vis aiming pattern frames the bar code to provide you with the best scanning performance.
☞NOTE: To achieve the best read, the aiming beam should be centered horizontally across the bar code.
The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from
the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or
elements (mil size) should be read farther from the unit.
area Imaging decode mode.
area imaging the Handy Terminal supports omni-directional aiming meaning that a
obtained from many positions. For details, see Omni-Directional Scanning Positions on
To Decode a Bar Code
2. Position the Handy Terminal over one of the Sample Bar Codes on paragraph 6.9.
25 cm) from the bar code is recommended.
3. Project the aiming brackets by pressing and holding the Scan key. The Scan LED lights red.
4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve
Directional Scanning Positions on paragraph 6.10.
5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
Sample Bar Codes
You can use the following bar codes to verify decoding:
Code 39 PDF 417
Directional Scanning Positions
aiming pattern frames the bar code to provide you with the best scanning performance.
To achieve the best read, the aiming beam should be centered horizontally across the bar code.
The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from
the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or
il size) should be read farther from the unit.
directional aiming meaning that a positive read can be
Directional Scanning Positions on paragraph 6.10.
4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve
lights green and the terminal beeps.
aiming pattern frames the bar code to provide you with the best scanning performance.
The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from
the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or