User's Manual

NAUTIZ X4 Manual
31 handheld
☞NOTE: You should always put the terminal in Suspend Mode when you change the battery pack; see Changing the Battery Pack on paragraph
4.18.
Troubleshooting Suspend/Resume
If the terminal does not wake when you press the Power button, the main battery might be too low to resume operation. To
check, remove the battery and install a fully charged battery or connect the terminal to a Handy Terminal charging
peripheral.
4.22. Memory Allocation
You can verify file storage and program memory in System Properties.
1. Tap Start -> Settings -> System -> Memory tab.
4.23. Care and Cleaning of the Products
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal
can be cleaned with a damp cloth.
4.24. NAUTIZ X4 Technical Specifications
Model
NAUTIZ X4
Operating System
Microsoft Windows Embedded Handheld 6.5 Pro
Application Software
Tools and Demos
Processor
Cortex-A8 1GHz
Memory
512MB RAM X 1GB Flash
Storage Expansion
User accessible Micro SD memory card slot.
Display
3.5 in. transmissive active matrix 65K color LCD with backlight, VGA (480 x 640)
Scan Engine
1D engine: N4313
2D engine : N560x
Keypad
Numeric , Qwerty
Audio
Built-in microphone and speaker
I/O
High speed USB 2.0 from cradle (or I/O cable)