User's Manual

NAUTIZ X4 Manual
29 handheld
• Single slot docking cradle/Single slot Ethernet cradle
• Insert the battery in the spare battery charging well in the back of either the Handy Terminal slot cradle or Handy
Terminal Ethernet cradle.
Charging Time
The standard capacity 4000mAh Li-ion battery pack requires five hours to charge to full capacity.
4.19. Managing Main Battery Power
Data and files saved on the Handy Terminal may be stored in RAM memory; therefore, maintain a continuous power supply
to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the
Handy Terminal. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and
begin recharging the battery.
☞NOTE: If the main battery is low and the terminal is in Suspend Mode, pressing the Power button does not wake the HANDY TERMINAL; you
must replace the discharged battery with a fully charged battery or apply AC power to the terminal.
Checking Battery Power
Tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge status of the main battery
☞NOTE: You can also check battery power by tapping Start -> Settings -> System -> Power.
4.20. Resetting the Terminal
There are three types of system resets: a Soft Reset, a Hard Reset, or a Factory Reset. The soft and hard resets preserve all
data stored in the file system.