User's Manual

NAUTIZ X4 Manual
27 handheld
☞NOTE: Signals referenced are for a DTE device.
USB Port
This connector supports High speed USB 2.0 communication (up to 480 Mbps)
Also external power from the MicroUSB Adaptor that is included with the terminal. When connected to the Handy
Terminal MicroUSB Adaptor, the terminal is powered and the main battery pack is charging.
4.14. Peripherals and Accessories
The following items are sold separately and enhance your HANDY TERMINAL’s capabilities.
Single Slot Cradle
This charging and communication cradle supports USB, enabling your terminal to interface with the majority of enterprise
systems. When a terminal is seated in a powered base, its battery pack charges in five hours for the standard capacity
4000mAh pack.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
Single Ethernet Cradle
The Single Ethernet cradle is used to charge the battery, to power the battery charging system in the terminal, and can be
used to communicate data from the terminal to a PC/laptop via the Ethernet port.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
4.15. USB ActiveSync Cable
The MicroUSB ActiveSync Cable is used when communicating between the terminal and a host computer to transfer data
via the USB interface.
4.16. Li-ion Battery Packs
The Li-ion battery pack provides the main power supply for the terminal.
4.17. Battery Power
The intelligent battery technology inside the terminal features of battery power:
• The battery pack
The battery works to prevent data loss when the terminal is used over long periods of time.
The battery must be charged to full capacity before using the HANDY TERMINAL for the first time!
Charge the main battery pack with the Handy Terminal charging cable for a minimum of 5 hours depending on your battery
before initial use.