Dolphin® 9500 Series Mobile Computer Microsoft® Windows Mobile® 5.
Dolphin 9500 Series Quick Start Guide Dolphin 9500 Series Terminals There are four terminals in the Dolphin 9500 Series: Dolphin 9500 Ergonomic form factor for single-handed use. Dolphin 9550 Integrated pistol grip for high-volume scanning applications. Dolphin 9501 Flashlight form factor with a laser scanner and imager. Dolphin 9551 Integrated pistol-grip with a laser scanner and imager.
Hardware Overview The front, side, and bottom panels of all the terminals in the Dolphin 9500 Series are the same. Front Panel Side Panel Image Engine window Decode LED Scan LED Magnesiumalloy top cover IrDA COM Port LCD with Touch Screen Access Door to the Secure Digital (SD) memory interface Audio Jack (2.
Dolphin 9500/9501 Back Panel Speaker Stylus (in slot) Microphone Battery Well (underneath the battery) Battery Note: The back panel of the Dolphin 9501 has an expanded bottom housing to accommodate the laser engine. Dolphin 9550/9551 Back Panel Dolphin 9550/9551 terminals feature an integrated pistol-grip on the back panel.
Setting Up Dolphin 9500 Series Terminals 1. Unpack the carton and verify its contents - page 4. 2. Install the battery in the terminal - page 4. 3. Charge the main battery in the terminal for a minimum of four hours - page 4. 4. Initialize the terminal - page 5. Step 1: Install the Main Battery Pack ! Use only the Li-ion battery packs provided by Hand Held Products.
Terminals are shipped with both batteries completely discharged. Charge the main battery pack for a minimum of four hours before initial use in the terminal! ! For charging, use a Dolphin 9500 Series peripheral and the power cables provided by Hand Held Products. Use of peripherals or cables not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal. Step 3: Initialize the Dolphin Terminal Note: Do NOT press any keys while the terminal is initializing! 1.
Resetting the Terminal There are two ways to reset the terminal: a soft reset and a hard reset. Soft Reset: Press and hold the CTRL + SFT keys. A soft reset re-boots the terminal without erasing RAM data. Hard Reset: Press and hold the CTRL + ESC keys. A hard reset erases all data and applications stored in RAM memory and re-initializes the terminal. Peripherals and Accessories Dolphin HomeBase™ Charging/communications cradle with auxiliary battery well. Data transfers via RS-232 serial or USB ports.
Technical Assistance If you need assistance installing or troubleshooting, please call your Distributor or the nearest Hand Held Products technical support office: North America/Canada Telephone: (800) 782-4263 Fax number: (315) 554-6705 E-mail: natechsupport@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: latechsupport@handheld.com Brazil Telephone: +55 (21) 2178-0500 Fax: +55 (21) 2178-0505 E-mail: brsuporte@handheld.
product. North America Telephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: naservice@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: laservice@handheld.com Brazil Telephone: +55 (21) 2178-0500 Fax: +55 (21) 2178-0505 E-mail: brservice@handheld.com Mexico Telephone: +52 (55) 5203-2100 Fax: +52 (55) 5531-3672 E-mail: mxservice@handheld.
Limited Warranty Hand Held Products, Inc. ("Hand Held Products") warrants its products to be free from defects in materials and workmanship and to conform to Hand Held Products’ published specifications applicable to the products purchased at the time of shipment.
• Use only power adapters approved for use by Hand Held Products. Failure to do so may result in improper operation or damage to the unit and will void the warranty. How to Extend Your Warranty Hand Held Products offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires.
Dolphin® 9500 Series Mobile Computer Quick Start Guide 11
12 Dolphin® 9500 Series Mobile Computer Quick Start Guide
Disclaimer Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Hand Held Products.
Hand Held Products, Inc. 700 Visions Drive P.O.
