User manual

B–6 Technical Specifications
B.7 SCANTEAM 3700 Interface Cable
10 Pin RJ41 Modular
Connector Pinouts
1
2 Shield/Drain
3 TRIG – Trigger/Enable (input)
4 GND– Ground
5 RX – Receive Data (input)
6 TX – Transmit Data (output)
7 VCC (+5VDC – input)
8 RTS – Ready to Send (output)
9 CTS – Clear to Send (input)
10
Connector Pinouts
1 TRIG
2 TX
3 RX
4 Unused
5 GND
6 Unused
7 CTS
8 RTS
9 VCC or Unused*
Shell Shield/Drain
9 Pin D Female
P1
To Host System
P1 P2
P2
P3
Optional connector for external power supply
To SCANTEAM 3700
Interface Port
Pin 1
Pin 10
Pin 2
Pin 4 Pin 3
Pin 1
Pin5 Pin 1
Pin 9 Pin 6
Connector Pinouts
1 VCC
2 GND
3 Unused
4 Unused
Shell Shield/Drain
4 Pin Mini–Din Female
Optional: P3
*Pin 9 is unused if an exter-
nal power supply is used
(P3).
Cable part number: 42205204–01 or 42205204–02 (external power required)
Caution: Do not substitute any other Welch Allyn serial interface cable.