User manual

Technical Specifications B–3
B.3 Electrical Specifications
Operating Voltage: +5V+5% ✺
Operating Current: 170 to 250 mA, ✺
depending on scan rate for
Standard Resolution/Enhanced Performance
CCD type
✺ Power for the SCANTEAM 3700 is provided by the host system.
Communications Port Connector Pin Assignments:
See chart below.
110
10–Pin Modular Connector
Communications Port
Pin Signal
1
Shield
Function
Cord Shield
2
Trigger/Enable ✤
3
Ground System Ground
4
Receive Data (Input)RX Data
5
TX Data
6
VCC +5VDC Power (Input)
7
RTS Ready to Send (Output)
8
CTS Clear to Send (Input)
Transmit Data (Output)
Trigger Signal to Decoder
Scanner Enable (Input)
✤ State depends on use
9
10
Hardwire Option:
See chart below.
Four Pads for Hardwire to
3700 Motherboard
Pin Signal
1 BTS
Function
Bootstrap
2 DIG IN Second Scanner Input
3 DEFAULT Reset
4 Good ReadIND