User Manual

- 6 -
■ Independent on/off pulse with 3 modes of continuous use, pulse and timed
continuous use.
■ 2D and 3D ultrasound probe design, which greatly improves efficiency and
reduces the loss of the horn compared to conventional ultrasound;
■ The device is equipped with a temperature sensor for temperature-sensitive
sample;
■ Automatic overload protection, over temperature and fault alarm.
■ Small bulb inside the box allows to observe the status of the sample during
processing.
6. Working Conditions
1. Working Temperature: 0～104℉(0～40℃)
2. Humidity: ≤85% （T=68℉=20℃）
3. Power Supply: 85~240V/50Hz±10%
4. Transducer Temperature: 0～248℉(0～120℃)
5. Processing Objects: Solution or solution mixture
6. Attention!
Do not use it continuously for over 1 hour when processing common sample!
Do not use it continuously for over 30 minutes for ultrasonic processing!