User Manual

- 11 -
Running Interface Shows
Total running time, working time,
pause time, user group, overload
temperature, power output ratio,
working mode, program save key
Small Bulb
Small bulb inside the box allows to
observe the status of the sample during
processing.
Size
18.5×12.6×20.6in (470×320×525mm)
Parameters of Ultrasonic Probe
Configuration of Piezoelectric Frequency Converter
Piezoelectric Frequency
Converter
CV33, PZT Lead Zirconate Titanate
Piezoelectric Ceramics
Diameter
62.5mm
Length
205mm
Standard Amplifier
Aluminum Alloy Material:
T1-6AL-4V
Horn Diameter
20mm
Processing Capacity
100mL—3000mL
Total Length
106-117mm (variable ratio)
Cable Line
150cm
Optional Accessories
Ultrasonic Horn(Optional)
Φ3，Φ6，Φ8，Φ10，Φ13，Φ16，Φ18，
Φ25
9．Maintenance
1. The equipment should be placed in a clean, dry and ventilated place.
2. Handle the transducer gently to prevent the it from breaking.
3. When the oscillator is hot, please use it after cooling.
4. After each use, the power plug should be pulled out and the power supply should