User's Manual

Rev.5.0, 2003-09-03 Page 5/5 www.hbe.co.kr

To confirm whether the device is installed properly, choose “ Start-> Settings->

Control Panel-> System-> Hardware”,

then double-click on the device manager

to display the [Universal Serial Bus] icon.

Double-click that icon to see if the “ USB

mass storage device” is installed.

It is recommended to use

USB2.0 XDRUM N Stick

compatibly with “Hi-Speed

USB 2.0”. If you connect the

USB2.0 XDRUM N Stick to a

“ non Hi-Speed USB 2.0 Hub”, Windows will display a warning message as

shown below. You may use the device without changing any settings, but

reading/writing speed will slow down.

Remove the USB2.0 XDRUM N Stick

In order to remove the device safely,

double-click the [safe hardware removal]

icon, remove device, then choose “ Stop->

OK-> OK-> Close”.