Installation Guide

HAMPTONBAY.COM
Please contact 855-HD-HAMPTON for further assistance.
6BInstallation
(
continued
)
6
Using quick connects
7
Connecting the wiring from the unit
to the house
WARNING: Wiring must comply with all applicable electrical
codes. Turn OFF power before removing or installing
connectors.
WARNING: COPPER TO COPPER ONLY. Do not use on
Aluminum wire.
CAUTION: Accessory part AA (quick connect) should meet
installation instructions below.
NOTE: The connector is reusable on solid wires of the same
wire gage or smaller. Do not reuse the connector on
stranded wires.
□ Strip the wires so half of the bare wire is showing.
□ Grip the wire firmly and push the stripped end of
the wire into the open port of the connector (AA).
Use only one stripped end of the wire per port.
□ Verify the stripped end of the wire is fully inserted
to the back of the connector (AA).
NOTE: Important wire information. Maximum temperature
rating 105°C (221°F). 600 volts maximum for building wire
and 1000 volts maximum in signs and lighting fixtures.
Flammability rating of the wires must meet UL94-V2. The
acceptable wire range includes: Solid: 12-20 AWG,
Stranded: 12-16 AWG (≤19 STRAND); 18AWG (7 STRAND),
Tin bonded: 14-18 AWG (≤19 STRAND).
WARNING: Follow all local electrical and safety codes.
WARNING: Failure to wire product correctly could result in
electrical shock, fire hazards, or damage to the product.
Consult a licensed electrician if you are unsure of your ability
to correctly install wiring.
CAUTION: Never place a switch where it can be reached
from a tub or shower.
CAUTION: If your house wires do not match these colors,
determine what each house wire represents before
connecting. You may need to consult a licensed electrician to
determine this safely.
□ Connect wires using the quick connector (AA, BB)
or wire nut (not provided).
□ Match colors as shown.
□ Replace the junction box cover. Do not pinch the
lead wires.
Single Switch Control - With a single switch, fan and
light can be turned on and off simultaneously.
Product wires
House wires
AA