Instructions / Assembly

8 9

ASSEMBLY INSTRUCTIONS

Install from below, no need for suspension

brackets (no attic access)

4. Remove fan unit by removing 3 screws.

5. Remove duct connector by removing duct screw.

6. A piece of wood (not supplied) is screwed in from

below through the ceiling board. Suggested size is

1 in. x 3 in. x 14 in. Position the screws far enough

away from the edge of the ceiling board that it does

not crumble and give way. Put screws in both ends

of wood beyond the 10 1/4 in. hole. Keep screws in

range of grille.

Duct screw

Wood support screwed in from

underneath. Screw is far enough away

from the edge of sheetrock to prevent

crumblimg.

Wood support