Instructions / Assembly

9 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly (continued)

Connecting the back panels

□ Connect the back panels (I and J) to the back of the

bookcase using six 4×16 screws (EE) along seam of the

panels (I and J).

Installing the shelves

□ Insert shelf supports (FF) into the desired holes along the

inside of the bookcase assembly and place the shelves (H)

on top of the supports (FF).

Securing the bookcase to the wall

□ Attach the wall bracket (II) to the top center of the

bookcase using a 4×16 mm screw (EE).

□ Position the bookcase along the portion of wall where you

wish the bookcase to remain and mark the installation hole

for the wall anchor (JJ) using a pencil.

□ Drill a hole for the wall anchor (JJ), insert the wall

anchor (JJ) into the wall, and secure the bookcase to the

wall using the 4×38 mm screw (HH).

WARNING: This unit must be anchored to a stud or wall,

as shown. Failure to so could cause severe injury.