OMSID # 205703198 Model # THD339414.2a USE AND CARE GUIDE Elite Base 2-Door With Drawer-Espresso Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this bookcase. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . .
Pre-Assembly PLANNING ASSEMBLY Compare all parts with the Hardware Included and Package Contents lists in this manual. If any part appears missing or damaged, do not assemble this product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com. TOOLS REQUIRED Flathead screwdriver Phillips screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A J K L I G H D M O F C B N E Part Description Quantity Part A Top 1 J Right Drawer Side 1 B Bottom 1 K Drawer Back 1 C Left Side Panel 1 L 1 D 1 M 1 N O Left Door Right Door 1 1 1 H Right Side Panel Bottom Front Rail Cross Bars Back Panel Drawer Front Drawer Bottom Adjustable Shelf I Left Drawer Side E F G 1 1 4 Description Quantity 1 1
Assembly 1 2 Preparing the top , cross bars and drawer front Assembling the bottom and bottom front rail □ Insert eight wood dowels (c) into the bottom (B) and bottom front rail (E). □ Insert eight wood dowels (c) into the top (A) and cross bars (F). □ Turn four cam bolts (b) into the holes in the drawer front (H). □ Turn two cam bolts (b) into the holes in the bottom (B).
Assembly (continued) 3 Assembling the slides to the left side panel □ Insert six cam locks (b) into the appropriate holes of the left side panel (C) , Make sure the threaded side is facing down into the threaded holes , Do not overtighten the cam locks (b). g □ fasten the left cabinet rail (l) to the left side panel (C) , use three screws (g) into the exact holes shown in the enlarged diagrams.
Assembly (continued) 5 Assembling the right side panel 6 Assembling the left side panel □ Connection top (A) , cross bars (F) , bottom (B) , bottom front rail (E) , and right side panel (D) , ensure that the wood dowels (c) and cam bolts (b) are fully inserted into the appropriate holes. □ Connection top (A) , cross bars (F) , bottom (B) , bottom front rail (E) , and left side panel (C) , ensure that the wood dowels (c) and cam bolts (b) are fully inserted into the appropriate holes.
Assembly (continued) 7 Assembling the back panel □ Fasten the back panels (G) to the assembled unit using Twenty-two screws (k) , Do not over tighten the screws. k Before attaching the back panel be sure that the unit is at 90° G B C 8 Assembling the drawer □ Fasten the drawer sides (I and J) to the drawer back (K) , Use four 35mm screws (j). J K □ Slide the drawer bottom (L) into the grooves in the drawer sides (I and J) and drawer back (K).
Assembly (continued) 9 10 Assembling the door Assembling the adjustable shelves and hinge □ Insert four shelf supports (i) into the desired holes the cabinets assembly and place inside the shelves (M) on top of the supports (i). □ Through two screws (g) with one hinge (h) to lock on the door , the same assembling step for the other three hinges (h). □ Through four screws (g) with one hinge (h) to lock on the side panel the same assembling step for the other three hinges (h).
Assembly (continued) To adjust the vertical height. Loosen the four screws "A" on both hinges. Two of them are usually in slotted holes which mean and you can adjust up or down by a few mm. Then tighten back up To adjust depth. Loosen screw "B" and adjust door, if the door can not be adjusted, please loosen screw "C", then try again. Tighten screw "B" and "C". To adjust side ways. Turning the screw "C" on BOTH hinges on each door.
Assembly (continued) 11 poner el cajón en el armario □ To insert the remaining drawer into your unit , tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit , lift the front of the drawer up and slide it into the unit. WEIGHT LIMITS □ This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
