538 854 Scottsdale 52 in Ceiling Fan Owne r’s manual Scottsdale Ventilador de Techo de 1,32 Manual del Propietario m
Scottsdale by Hampton Bay ®
52 Scottsdale Thank you for purchasing our ceiling fan. This product has been manufactured with the highest standards of safety and quality. Ceiling Fan by Hampton Bay Date Purchased Table of Contents Store Purchased Safety Rules . . . . . . . . . . . . . . . . . . . . 1 Unpacking Your Fan . . . . . . . . . . . . . . 2 ETL Model No. CF552B-CK52 Installing Your Fan . . . . . . . . . . . . . . . 3 Installing the Light Kit. . . . . . . . . . . . . 8 Care of Your Fan . . . . . . . . . . . . . . . .
Safety Rules - Read and Save These Instructions 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. WARNING: To reduce the risk of electrical shock or fire, do not use this fan with any solid-state fan speed control device.
Unpacking Your Fan Unpack your fan and check the contents. You should have the following items: 5 1 9 6 A B C D 10 2 7 11 3 8 4 1. 2. 3. 4. 5. 6. 7. 8. 9. Fan blades (5) Mounting bracket (1) Canopy (1) Canopy cover (1) Downrod assembly (1) Coupling cover (1) Fan motor assembly ( 1 ) Blade holders ( 5 ) Light kit (1) 10. 11. CFL bulbs(3) Glass shape (3) E 12 12. Loose parts bag containing: A. Wire nuts (3) B. Blade attachment hardware (16 screws and paper washers) C.
Installing Your Fan Tools Required Provide Strong Support Figures 1~3 are examples of different ways to mount the outlet box. Phillips screwdriver, straight slot screwdriver, step ladder and wire cutters. Recessed Outlet Box Mounting Options Outlet Box If there isn't an existing UL listed mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building structure.
6. Now lift motor assembly into position and place hanger ball into mounting bracket. Rotate until the check groove drops into the registration slot and REMEMBER to turn off the power. Follow the seats firmly. (Figure 10) Downrod should not rotate steps below to hang your fan properly: if this is done correctly. Hanging the Fan 1. Secure the mounting bracket to the ceiling outlet box with the screws and washers provided with your outlet box.
WHITE BLACK Hampton Bay Retailer, the wire color out of wall control may vary, see wall control's installation manual for correct wire connections) Ground Conductor NOTE LIGHT KITS ARE AVAILABLE AT YOU HAMPTON BAY RETAILER. THE FAN IS ALREADY WIRED TO SUPPORT THE LIGHT KIT OPTION. GREEN Outlet Box BLUE BLACK Remember to shut off the power. Follow the steps below to connect the fan to your ceiling wiring. Use the wire nuts supplied with your fan. Secure the connectors with electrical tape.
Light WHITE Ground Conductor SUPPLY CIRCUIT BLACK WHITE BLACK SUPPLY CIRCUIT Ground Conductor Outlet Box Ground to Downrod GREEN Green Ground Lead BLUE GREEN WHITE BLUE BLACK Light Switch BLACK WHITE Outlet Box Fan Green Ground Lead Ground to Downrod Finishing the Installation 1. Tuck connections neatly into ceiling outlet box. 2. Remove one screw from the mounting bracket and loosen the other screw around 1/4″. 3. Align the canopy up to ceiling and over the loose screw.
Attaching the Fan Blades Motor housing 1. Check that all blades and blade holder screws are secure. 1. A ttach the blades to the blade holders using three screws and paper washer as shown in Figure 15. Start a screw into the blade holder, do not tighten. Repeat for the 2 remaining screws and washers. Screw Blade holder 2. Tighten each screw securely starting with the center screw. Make sure the blade is straight. 3.
Installing the Light Kit Housing CAUTION To Reduce The Risk Of Electric Shock, Disconnect The Electrical Supply Circuit To The Fan Before Installing Light Kit. REMEMBER The fan blades must already be attached to the fan. 4. To install light kit glass shade, loosen the socket ring on the light kit and install the glass shade to the light kit. Secure by tightening the socket ring previously loosened . (Figure 19) 5. Install 3*13W CFL.
Speed settings for warm or cool weather depend on factors such as the room size, ceiling height, number of fans, etc. The Reverse switch is located on the compartment box. Slide the switch left for warm weather operation. Slide the right for cool weather operation. NOTE WAIT FOR FAN TO STOP BEFORE CHANGING THE SETTING OF THE SLIDE SWITCH. Figure 20 Warm weather - (Counter-Clockwise direction) A downward air flow creates a cooling effect.(Fig.
Care of Your Fan Troubleshooting Here are some suggestions to help you maintain your fan. PROBLEM 1. Because of the fan's natural movement, some Fan will not start connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from ceiling.) Fan sounds noisy 2. Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning.
Specifications FAN SIZ E SPEED VOLT S AMPS LOW 52” MED HIGH 120 WATT S RPM 0.216 9.9 60 1962 0.392 32.6 118 3660 0.529 62.0 165 4978 These are approximate measures. They do not include Amps and Wattage used by the light kit. Distributed by Your Other Warehouse, LLC 12100 Little Cayman Dr. Baton Rouge, LA 70809 11 CFM N.W. 8.49kgs 18.72lbs G.W. 9.7kgs 21.38lbs C.F. 1.
Lifetime Limited Warranty (lifetime warranty on motor) The Hampton Bay warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser.
