Instructions / Assembly

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
3 Installing the light fixture
□ After wires are connected, tuck them carefully inside
the outlet box.
□ Raise the canopy (A) allowing for the mounting
screws (BB) to protrude through the holes on the
canopy (A) and secure with the ball nuts (FF).
Care and Cleaning
□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem
Possible Cause Solution
□ The bulb is burned out. □ Replace the light bulb.
□ The power is off. □ Ensure that the power supply is
turned on.
□ There is a faulty wire connection. □ Check the wiring.
The bulb will not light.
□ The circuit breaker is off. □ Ensure that the circuit breaker is
set in the On position.
The fuse blows or a
circuit breaker trips when
the light is turned on.
□ Discontinue use of the light
fixture.
□ Contact a qualified electrician or
call the Customer Service Team
at 1-855-HD-HAMPTON.
□ Unplug other items on the
circuit.