Instructions / Assembly

10
ASSEMBLY INSTRUCTIONS
DD
D
F
8
7
B
GG
FF
A
GG
FF
7. Feed the valve and gas hose and
connect Upper Pole (D) to the Lower
Pole Assembly (F).
7.1 Feed the valve and gas hose into
and go through the Lower Pole
Assembly
7.2 Screw Upper Pole (D) onto Lower
Pole Assembly (F) until the holes on
Upper Pole (D) is aligned to the holes on
top of Lower Pole Assembly (F). Fix
them by using three M5 x 8 mm Bolts
(DD). Ensure they are fully tightened.
8. Attach the four KD Domes (B)
using M5 x 8 mm Silver Bolts (FF)
and M5 Nuts (GG). Then, complete
dome assembly by attaching Top
Dome (A) to KD Domes (B) with
M5 x 8 mm Silver Bolts (FF) and
M5 Nuts (GG).
DD
FF
GG