Use and Care Manual

9 HAMPTONBAY.COM
Please contact 855-HD-HAMPTON for further assistance.
Installing LP Gas Tank
1
Inserting and Securing an
LP Gas Cylinder
2
Disconnecting the LP Gas
Cylinder
□ This appliance uses a 1 lb (16.4 oz) cylinder only.
□ Only a cylinder marked “propane” can be used.
□ Align the threads on the canister with those on the
regulator, insert and rotate the canister clockwise
until they fit snugly together.
□ HAND TIGHTEN ONLY. Be careful not to cross
threads when screwing in the canister. Keep the
cylinder vertically upright on the base for vapor
withdraw.
NOTE: Some 1-lb cylinders may form frost when
near empty.
□ Before disconnecting make sure the heater
control valve is “OFF”.
□ Rotate the LP gas cylinder counterclockwise until
it is loose.
□ Store the LP gas cylinder in a proper location.
1 lb