Installation Guide

8
ASSEMBLY INSTRUCTIONS
5. Attach reflector spacers (FF) and Ø8 washers
(GG) to the top of head assembly (C). Tighten the
reflector spacers.
FF
GG
x 3
Reflector Spacer
x 3
Hardware Used
Hardware Used
LL
x 4
Stainless steel bolt M6 x 10
6. Unscrew stainless steel bolts M6 x 10 (LL) from
head assembly.
7. Insert hose of head assembly into pole. Secure
head assembly to pole with stainless steel bolts.
Note: The control knob on head assembly should
be above the decal on pole.
5
C
FF
GG
6
7
C
LL