Installation Guide
6
Hardware Used
CC
2
2. Attach cylinder housing (H) loosely to base (M) with
M5 x 8 screws (CC).
M5 x 8 Screw
x 4
H
M
CC
ASSEMBLY INSTRUCTIONS
Hardware Used
1. Reverse the base (J), fix the ground fixer (PP) to the base
Secure the ground fixer (PP) with two nuts M6 (QQ). Fix
another two ground fixer (PP) with bolts and nuts, and
reverse the base (J).
Note: Nails 1981-RTLL for anchoring the base securely to
the ground are not inculded.
MM
x 1
Wrench
1
J
DD
PP
QQ
GG
x 6
x 6
x 6
x 3
PP
DD
GG
QQ
Bolt M6 x 10
M6 Nut
This product contain sharp edges on
the panels cylinder housing and
handle please install with care.