INSTRUCTIONS MANUAL 6 Light Island Fixture Menlo Park Collection HOME DEPOT SKU N2005 (UPC 887016005829) Brushed Nickel Finish 1
Thank you for purchasing this Hampton Bay interior six light Island Fixture. This product has been manufactured with the highest standards of safety and quality. FEATURES: 1. Easy to install. 2. Standard 72-inch wire and 60-inch chain for open entry-way and cathedral ceiling installations. Also includes one Loop Lock to easily adjust length of chain. QUESTIONS, PROBLEMS, MISSING PARTS: Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit www.homedepot.
. If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your SKU (N2005) or UPC (887016005829). 4. KEEP your receipt and these Instructions for Proof of Purchase.
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale): 1 ea Main Fixture Body (#1) 2 ea Metal Pads (#6) 2 ea Loops (#7) 2 ea Nipples (#2) 1 ea Shade (#8) 2 ea Hex Nuts (#3) 2 ea Tubes (#4) 8 ea Screws (#9) 6 ea Candle Tubes (#10) 2 ea Caps (#5) 1 ea “L” Phillips Screwdriver (# 11) ASSEMBLY INSTRUCTIONS: 1. Carefully unpack the fixture. Lay out all parts on a clean surface. 2. Screw the Nipples (#2) into the coupling on the Main Fixture Body (#1), and secure them with Hex Nuts (#3).
ASSEMBLY: Fig.1 Wire Slot (#13) Chain (#12) Loop Lock (#7) Loop Fig.
PARTS INCLUDED FOR INSTALLATION (parts are not to scale): 4 ea Loop Locks (#12) 1 ea Canopy Cover Assembly(#14) 2 ea 5 feet Chain (#13) 1 ea End Cap (#15) 2 ea Hex Nuts (#16) 2 ea Mounting Screws (#20) 3 ea Wire Connectors (#21) GND 2 ea Lock Washers (#17) 1 ea All Thread Rod (#18) 1 ea Mounting Strap (#19) INSTALLATION INSTRUCTIONS: 1. Using a Phillips Screwdriver, securely fasten the Mounting Strap (#19) to the Outlet Box using the two Mounting screws (#20) provided. 2.
INSTALLATION: (#16) Hex Nut (#20) Mounting Screw (#19) Mounting Strap Ground Screw (#18) All Thread Rod (#17) Lock Washer (#16) Hex Nut (#14) Canopy Cover Assembly (#15) End Cap (#12) Loop Lock (#13) Chain (#12) Loop Lock (#7) Loop 7
TROUBLESHOOTING: Light will not turn on. Fuse blows or circuit breaker trips when light is turned on. Possible Cause Corrective Action 1. P ower is off. 1. M ake s ure p ower sup p ly is on. 2. F ault y s wit ch. 2. T es t or rep lace swit ch. 3. Faulty wire connection. 3. Check wiring. Crossed wires or power wire is grounding out. Check wire connections. PRODUCT MAINTENANCE: 1.
