Instructions / Assembly

6
Installation (continued)
3
Securing the fixture to the
mounting plate
4
Applying caulk
□ Place the fixture (A) against the mounting plate (AA).
□ Use a Philips screwdriver to screw a set screw (BB)
through the hole on the left of the fixture (A) and
through the hole on the left of the mounting plate
(AA).
□ Use a Philips screwdriver to screw a set screw (BB)
through the hole on the right of the fixture (A) and
through the hole on the right of the mounting plate
(AA).
CAUTION
:
The fixture (A) is one piece.
Do not disassemble it.
□ Once the fixture is mounted on the wall, caulk
the space between the wall and the upper 3/4
area of the fixture body (A) to prevent water
seeping into the wall.
□ Leave the bottom 1/4 area uncaulked for
drainage of any water which might leak into
the enclosure.