Item # 1007183440 Model # HDP00830 USE AND CARE GUIDE ASPENWOOD 6-LIGHT OUTDOOR CHANDELIER Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included. . . . . . . . . . . . .
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This light fixture requires the use of six 120V, 60Hz, 60-Watt max., candelabra-base type B bulbs (not included). Do not exceed the recommended wattage.
Pre-Installation (continued) PACKAGE CONTENTS E D C B A F Part Description Quantity A Fixture Body 1 B C Cup (Pre-assembled on the fixture body (A)) Socket (Pre-assembled on the fixture body (A)) 6 6 D Glass Shade 6 E Chain (Pre-assembled on the fixture body (A)) 1 F Switch (Pre-assembled on the fixture body (A)) 1 4
Installation - using power cord 1 4 Unpacking the light fixture □ Carefully unpack the fixture and lay out all parts on a clean surface. □ Adjust the height of the fixture body (A) as desired and attach the chain (E) to the hooks (KK). NOTE: If using power cord follow instructions below. If wiring to an outlet box proceed to hardwired installation instructions. 2 Hanging the chandelier NOTE: Do not attach the cord to the hooks (KK) directly.
Installation - using power cord (continued) 5 6 Installing the bulbs □ Prior to installing the bulbs, inspect sockets for silica packets. If packets are present, then remove and throw away. Do not expose to children or pets. Installing the glass shades □ Screw six glass shades (D) into the cups (B). □ Plug cord into an outlet and turn on the switch (F). □ Install six 120V, 60Hz, 60-Watt max., candelabra-base type B bulbs (not included) into the sockets (C) of the light fixture.
Installation - hardwired 1 3 Unpacking the light fixture □ Carefully unpack the fixture and lay out all parts on a clean surface. □ Split the end of the wires 6 inches from the end. □ Strip the plastic covers off the black and white wires about 1/2 inch from the end. NOTE: If wiring to an outlet box, follow instructions below. If using power cord, return to using power cord instructions. □ Strip the plastic cover off the green wire about 5 inches from the end.
Installation - hardwired (continued) 5 6 Installing the cross bar Connecting the wires □ Install the fixture green ground wire (1) under the ground screw (EE) on the cross bar (BB). DANGER: Ensure the power is off at the main fuse box prior to beginning installation. □ Connect the fixture green ground wire (1) to the green (or bare, or green and yellow) supply ground wire (2) in the outlet box using a wire nut (AA). □ Turn off the switch at the wall. □ Turn the power off at the main fuse box.
Installation - hardwired (continued) 7 8 Hanging the light fixture Installing the bulbs □ Prior to installing the bulbs, inspect sockets for silica packets. If packets are present, then remove and throw away. Do not expose to children or pets. □ Push all excess wires into the outlet box. □ Raise the canopy (GG) to the ceiling and secure in place by screwing the screw collar nut (II) onto the screw collar loop (HH). □ Install six 120V, 60Hz, 60-Watt max.
Installation - hardwired (continued) 9 Installing the glass shades □ Screw six glass shades (D) into the cups (B). □ Restore power and turn on the switch (F).
Care and Cleaning □ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem The bulb will not light. The fuse blows or a circuit breaker trips when the light is turned on. Possible Cause □ The bulb is burned out. Solution □ Replace the light bulb. □ The power is off. □ The cord is not plugged in. □ Ensure that the power supply is turned on. □ There is a faulty wire connection. □ Check the wiring.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
