Instructions / Assembly

6
ASSEMBLY INSTRUCTIONS
Hardware Used
EE
FF
II
Hardware Used
2
1. Assemble the wheel assembly to the
bottom plate. Fix the wheel assembly to the
bottom plate using 4pcs bolt M6 x 12 and 4pcs
flange nut M6.
2-1. Unscrew the switch button, load small
battery, tighten the switch button.
2-2. Fix the 4pcs ground fixtures to 4pcs of
lower support, using 4pcs screw M6 x 15.
Insert the pins of the base to the holes of
lower support, press to secure the pins. Using
4pcs screw M5 x 12 to secure the lower
support and base.
Insert the pins of the control box assy to the
holes of upper support, press to secure the
pins. Using 4pcs screw
3/16” screw to secure
the upper support and control box assy.
x 4
x 4
Wrench
x 1
J
GG
PP
OO
DD
K
GG
JJ
x 4
Philips
screwdriver
x 1
x 4
x 4
Bolt M6 x 12
M6 Flange nut
Screw M5 x 12
DD
x 4
3/16” Screw
OO
PP
Screw M6 x 15
Ground Fixtures
QQ
AA Battery (1.5 V)
1
M
EE
FF
WARNING
This product contain sharp edges on
the panelscylinder housing and
handle please install with care.