Instructions / Assembly

10
ASSEMBLY INSTRUCTIONS
9. Attach the three side panels to the heater
using 18pcs screw 3/16”.
Note : Do not cover the front side where
the control knob is.
Hardware Used
DD
JJ
x 18
Philips
screwdriver
3/16” Screw
x 1
10. Install the knob to M4x6 screw. Hang the
chain to the hole on the control box assy and
put the pothook of front panel to the holes of
bottom plate.
Note: Nails 1981-RTLL for anchoring
the base securely to the ground are
not inculded.
Hardware Used
x 1
KK
Knob
LL
JJ
x 1
x 1
Philips
screwdriver
Screw M4 X 6
x 1
MM
Chain
9
DD
10
KK
LL
H
MM