Item # Model #GFS60014A USE AND CARE GUIDE STEEL GAZEBO WITH HEAT TRANSFER FRAME Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU lly create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Pre-Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Care and Cleaning . . . .
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. NOTE: For safety, please use ladders and assemble on level ground. 8-Foot Ladder (Qty. 2 recommended) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity
Assembly 1 Attaching the Foot P Covers and the to the Post Legs Insert the foot plate cover (B1) into the post leg (A) from the bottom. (B2) using M6x15 combination bolts (AA). Attach the post leg (A) to the foot p Fully tighten the bolts using the hex wrench (JJ). Repeat this step for the other three post legs (A). A A B2 B1 X4 AA 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) 2 Inserting the Lining Ring Beam into the Long Side Left Beam and Long Side Right Beam Insert the lining ring beam (D) into the long side left beam (C1) and long side right beam (C2) using M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ). Repeat this step for the other long side left beam (C1) and long side right beam (C2).
Assembly (continued) 3 Attaching the Beam Center Cover and the Middle Inclined Beam Connectors to the Assembled Long Side Beam Attach the beam center cover (E) to the middle of assembled long side beam (C1&C2), then attach the middle inclined beam connector (F) to the beam center cover (E), align the hole and secure with M6x15 combination bolts (AA) as shown below. Attach the middle inclined beam connector (F) to the long side left beam (C1) directly using M6x15 combination bolts (AA).
Assembly (continued) 4 Attaching the Assembled Long Side Beam to the Post Legs Attach the assembled long side beam (C1&C2) to the two post legs (A) using M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ). Repeat this step for the other two post legs (A).
Assembly (continued) 5 Inserting the Lining Ring Beam into the Short Side Left Beam and Short Side Right Beam Insert the lining ring beam (D) into the short side left beam (G1) and short side right beam (G2) using M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ). Repeat this step for the other short side left beam (G1) and short side right beam (G2). G1 G2 G1 AA AA G1 G2 D 9 X2 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) 6 Attaching the Triangular Support Pipe to the Assembled Short Side Beam Attach the triangular support pipe (H) to the assembled short side beam (G1&G2) using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ). Repeat this step for the other triangular support pipe (H). NOTE: The triangular support (H) should insert from the side of the assembled short side beam (G1&G2) without hole to the side with hole.
Assembly (continued) 7 Attaching the Oblique Beams to the Assembled Short Side Beam and Triangular Support Pipe Attach the oblique left beam (J1) and the oblique right beam (J2) to the assembled short side beams (G1&G2) and triangular support pipe (H) using M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ). Repeat this step for another oblique left beam (J1) and the oblique right beam (J2).
Assembly (continued) 8 Connecting the Assembled Short Side Beams to the Assembled Long Side Beams and Post Legs Attach the assembled short side beams (G1&G2) to the assembled long side beams (C1&C2) using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 9 Connecting the Other Assembled Short Side Beams to the Assembled Long Side Beams and Post Legs Attach the other assembled short side beams (G1&G2) to the assembled long side beams (C1&C2) using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ). G1&G2 AA C1&C2 G2 G1 C1 C2 C2 G1 G2 C1 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) 10 Attaching the Corbels to the Beams and the Post Legs Attach four corbels (K) to the assembled long side beams (C1&C2) and post legs (A) using M6x15 combination bolts (AA). Attach the other four corbels (K) to the assembled short side beams (G1&G2) and post legs (A) using M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) the Crossbeam Support Brackets to the Long Side Beams and the Short 11 Attaching Side Beams Attach the crossbeam support brackets (L) to the assembled long side beam (C1&C2) and the short side beam (G1&G2) using M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ). L G1&G2 C1&C2 AA G2 G1 L L C1 L C2 L G1 C2 G2 C1 X4 15 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) 12 Attaching the Studs to the Top Beam Screw the studs (GG) to the top beam (M), as shown below. Repeat this step for the other top beam (M). NOTE: Pay attention to tighten the correct holes.
Assembly (continued) 13 Inserting Lining Ring Beam into the Top Beams Insert the lining ring beam (D) into two top beams (M) using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ). M D AA AA M 17 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) 14 Attaching the Roof Panel Connectors to the Top Beams Attach the roof panel connector 1 (N1) and roof panel connector 2 (N2) to the top beams (M) using M6x20 countersunk bolts (CC), as shown below. Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 15 Attaching the Chandelier Hooks to the Top Beams Screw the chandelier hooks (U) clockwise to the top beams (M), as shown below. M U M U 19 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) Inserting the Top Beams to the Oblique Beams and Attaching the Top Beam 16 Plates to the Oblique Beams and Top Beams Insert the assembled top beams (M) to the oblique left beams (J1) and oblique right beams (J2), as shown below. Attach the top beam plates (O) to the top beams (M) and the oblique beams (J1&J2), align the holes and secure with M6x15 combination bolts (AA). Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 17 Attaching the Corner Rafters to Top Beams and the Assembled Long Side Beams Attach the corner rafters (P) to the top beams (M) and the middle inclined beam connectors (F) in the assembled long side beam using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ). P F M AA AA P P F X2 21 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) 18 Unfolding the Rafter Branch Assemblies Unfold the four rafter branch assemblies (Q), as shown below.
Assembly (continued) 19 Attaching the Unfolded Rafter Branch Assemblies Put the rafter branch assemblies (Q) to the side of the corner rafters (P), attach the unfolded rafter branch assemblies (Q) to the top beams (M) and the middle inclined beam connectors (F) using M6x15 combination bolts (AA). Then attach the corner rafters (P) and the oblique beams (J1&J2) using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 20 Attaching the Roof Panels Attach the roof panels 1 (R1) to the roof panel connector 1 (N1) using M6x10 combination bolts (BB), as shown below. Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 21 Attaching the Roof Panels Insert one roof panel 2 (R2) into the groove of the roof panel 1 (R1). Insert another roof panel 2 (R2) into the groove of the roof panel 2 (R2). Insert the third roof panel 2 (R2) into the groove of the roof panel 2 (R2). Attach roof panels 2 (R2) to roof panel connector 2 (N2) using M6x10 combination bolts (BB), as shown below. Fully tighten the bolts using the hex wrench (JJ). R1 N2 BB R2 R2 N2 R2 R1 25 HAMPTONBAY.
Assembly (continued) 22 Attaching the Roof Panel Insert the roof panel 3 (R3) into the groove of the roof panel 2 (R2), then attach roof panel 3 (R3) to roof panel connector 1 (N1) using M6x10 combination bolts (BB), as shown below. Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 23 Attaching the Edge Roof Cap 1, the Center Roof Edge Cap 2 and the Edge Roof Cap 3 Attach the edge roof cap 1 (T1), the center roof edge cap 2 (T2) and the edge roof cap 3 (T3) to the top of roof panel 1 (R1), the roof panel 2 (R2) and roof panel 3 (R3) in turn using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ). T2 R1 R2 T2 AA T1&T3 AA R2 T1&T3 T3 T2 T1 27 HAMPTONBAY.
Assembly (continued) 24 Attaching the Roof Panel Attach the roof panel 1 (R1) to the roof panel connector 1 (N1) using M6x10 combination bolts (BB), as shown below. Fully tighten the bolts using the hex wrench (JJ). NOTE: When assembly roof panel 1 (R1), the opposite is the assembled roof panel 3 (R3).
Assembly (continued) NOTE:
Assembly (continued) Attach the top cover (S ) to the roof panel Fully tighten the bolts using the hex wrench (JJ) and the wrench (KK).
Assembly (continued) 27 Attaching the Roof Panels and the Top Covers Insert the third roof panel 2 (R2) into the groove of the roof panel 2 (R2), then attach the roof panel 2 (R2) to the roof panel connector 2 (N2) using M6x10 combination bolts (BB). Attach the top cover 2 (S2) to the roof panel 2 (R2) using a nut (DD), a washer (EE) and a nut cap (FF), as shown below. Fully tighten the bolts using the hex wrench (JJ) and wrench (KK). R2 N2 FF DD EE BB R2 S2 R2 R2 31 HAMPTONBAY.
Assembly (continued) 28 Attaching the Roof Panels Insert roof panel 3 (R3) into the groove of the roof panel 2 (R2), then attach roof panel 2 (R2) to roof panel connector 2 (N2) using M6x10 combination bolts (BB). Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 29 Attaching the Top Covers Angle the top cover 1 (S1) to 30 degrees, insert the top cover 1 (S1) to the top cover 2 (S2) and secure using a nut (DD), a washer (EE) and a nut cap (FF), as shown below. Fully tighten the bolts using the hex wrench (JJ) and wrench (KK). NOTE: Make sure to place the washer (EE) first, and then screw on the nut (DD). FF R1 S1 DD S2 EE R3 S1 S1 R1 R2 S2 R3 R2 33 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Assembly (continued) the Edge Roof Cap 1, the Center Roof Edge Cap 2 and the Edge 30 Attaching Roof Cap 3 Attach the edge roof cap 1 (T1), the center roof edge cap 2 (T2) and the edge roof cap 3 (T3) to the roof panel 1 (R1), the roof panel 2 (R2) and roof panel 3 (R3) in turn using M6x15 combination bolts (AA), as shown below. Fully tighten the bolts using the hex wrench (JJ).
Assembly (continued) 31 Inserting the Stakes Lift the foot plate covers (B1) first. Insert the stakes (HH) through the foot plates (B2) into the ground. A B1 HH HH B2 35 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistancee.
Care and Cleaning For best results, clean the gazebo with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach or solvents. Store the gazebo in a dry, sheltered place when not in use. Keep the gazebo away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
1-855-HD-HAMPTON HAMPTONBAY.
