Instructions / Assembly

Assembly

ATTACHING THE SEAT

FRAME TO THE BACK FRAME

ATTACHING THE LEFT AND

RIGHT ARM

□ Remove all the protective material carefully. Avoid

cutting the surface of the furniture while removing the

packaging material on all components.

□ Place the Seat Frame (A) on a soft, flat non-abrasive

surface.

□ Loosely attach the Back Frame (B) to the Seat Frame

(A) with the Hex Bolts (BB) and Washers (FF). Do not

put the Hex Bolt Caps (JJ) on the Hex Bolts (BB) until

the assembly is complete.

NOTE: Do not tighten bolts completely until assembly

is complete.

□

Loosely attach the Left Arm Frame (D) to the Seat

Frame (A) using the Hex Bolts (BB) and Washers

(FF).

□

Loosely attach the Left Arm Frame (D) to the Back

Frame (B) by aligning the bolt holes in the Left Arm

Frame (D) with the bolt holes in the Back Frame (B)

and securing with the Socket Hex Bolts (CC) and

Washers (FF).

□

Repeat the same process above to attach the Right

Arm Frame (C) to Seat Frame (A) and Back Frame

(B)

□ Once all the bolts are in p

lace, securely tighten all the

Bolts (BB) with the Hex Wrench (LL) and tighten all

the Bolts (CC) with the Hex Screw Driver (MM). Do

not put Hex Bolt Caps (JJ) and Socket Hex Bolt Caps

(KK) on the bolts until all assembly is complete.